PIC16F7X7
REGISTER 9-1:
CCPxCON: CCPx CONTROL REGISTER (ADDRESS 17h, 1Dh, 97h)
U-0
—
U-0
—
R/W-0
R/W-0
R/W-0
R/W-0
R/W-0
R/W-0
CCPxX
CCPxY
CCPxM3 CCPxM2 CCPxM1 CCPxM0
bit 0
bit 7
bit 7-6
bit 5-4
Unimplemented: Read as ‘0’
CCPxX:CCPxY: PWM Least Significant bits
Capture mode:
Unused.
Compare mode:
Unused.
PWM mode:
These bits are the two LSbs of the PWM duty cycle. The eight MSbs are found in CCPRxL.
bit 3-0
CCPxM3:CCPxM0: CCPx Mode Select bits
0000= Capture/Compare/PWM disabled (resets CCPx module)
0100= Capture mode, every falling edge
0101= Capture mode, every rising edge
0110= Capture mode, every 4th rising edge
0111= Capture mode, every 16th rising edge
1000= Compare mode, set output on match (CCPxIF bit is set)
1001= Compare mode, clear output on match (CCPxIF bit is set)
1010= Compare mode, generate software interrupt on match (CCPxIF bit is set, CCPx pin is
unaffected)
1011= Compare mode, trigger special event (CCPxIF bit is set, CCPx pin is unaffected);
CCP1 clears Timer1; CCP2 clears Timer1 and starts an A/D conversion (if A/D module
is enabled)
11xx= PWM mode
Legend:
R = Readable bit
-n = Value at POR
W = Writable bit
‘1’ = Bit is set
U = Unimplemented bit, read as ‘0’
‘0’ = Bit is cleared x = Bit is unknown
DS30498C-page 88
2004 Microchip Technology Inc.
MICROCHIP [ MICROCHIP ]
