PIC16C71X
Applicable Devices 710 71 711 715
Standard Operating Conditions (unless otherwise stated)
Operating temperature 0˚C
-40˚C
-40˚C
≤ TA ≤ +70˚C (commercial)
≤ TA ≤ +85˚C (industrial)
≤ TA ≤ +125˚C (extended)
DC CHARACTERISTICS
Operating voltage VDD range as described in DC spec Section 13.1
and Section 13.2.
Param
No.
Characteristic
Output High Voltage
Sym
Min Typ Max Units
†
Conditions
D090
I/O ports (Note 3)
VOH VDD - 0.7 -
VDD - 0.7 -
-
-
-
-
V
V
V
V
IOH = -3.0 mA, VDD = 4.5V,
-40°C to +85°C
IOH = -2.5 mA, VDD = 4.5V,
-40°C to +125°C
IOH = -1.3 mA, VDD = 4.5V,
-40°C to +85°C
IOH = -1.0 mA, VDD = 4.5V,
-40°C to +125°C
D090A
D092
OSC2/CLKOUT (RC osc config)
VDD - 0.7 -
D092A
VDD - 0.7 -
Capacitive Loading Specs on
Output Pins
D100
OSC2 pin
COSC2
-
-
-
-
15
50
pF In XT, HS and LP modes when
external clock is used to drive
OSC1.
D101
†
All I/O pins and OSC2 (in RC mode) CIO
pF
Data in “Typ” column is at 5V, 25°C unless otherwise stated. These parameters are for design guidance only
and are not tested.
Note 1: In RC oscillator configuration, the OSC1/CLKIN pin is a Schmitt Trigger input. It is not recommended that the
PIC16C7X be driven with external clock in RC mode.
2: The leakage current on the MCLR pin is strongly dependent on the applied voltage level. The specified levels
represent normal operating conditions. Higher leakage current may be measured at different input voltages.
3: Negative current is defined as coming out of the pin.
DS30272A-page 116
1997 Microchip Technology Inc.
MICROCHIP [ MICROCHIP ]
