PIC16C63A/65B/73B/74B
EXAMPLE 4-2:
INDIRECT ADDRESSING
4.5
Indirect Addressing, INDF and
FSR Registers
movlw
movwf
0x20
FSR
;initialize pointer
;to RAM
The INDF register is not a physical register. Addressing
the INDF register will cause indirect addressing.
NEXT
clrf
incf
btfss
goto
INDF
;clear INDF register
FSR,F ;inc pointer
FSR,4 ;all done?
Indirect addressing is possible by using the INDF reg-
ister. Any instruction using the INDF register actually
accesses the register pointed to by the File Select Reg-
ister, FSR. Reading the INDF register itself indirectly
(FSR = ’0’) will read 00h. Writing to the INDF register
indirectly results in a no-operation (although status bits
may be affected). An effective 9-bit address is obtained
by concatenating the 8-bit FSR register and the IRP bit
(STATUS<7>), as shown in Figure 4-4.
NEXT
;no clear next
CONTINUE
:
;yes continue
Note: Maintain the IRP and RP1 bits clear.
A simple program to clear RAM locations 20h-2Fh
using indirect addressing is shown in Example 4-2.
FIGURE 4-4:
DIRECT/INDIRECT ADDRESSING
Direct Addressing
Indirect Addressing
from opcode
7
RP1:RP0
0
6
0
0
IRP
0
FSR register
bank select
location select
bank select
location select
00
01
80h
10
100h
11
00h
180h
not used
Data
Memory
7Fh
FFh
17Fh
1FFh
Bank 0
Bank 1 Bank 2
Bank 3
Note 1: For register file map detail, see Figure 4-2.
2: Shaded portions are not implemented; maintain the IRP and RP1 bits clear.
2000 Microchip Technology Inc.
DS30605C-page 27