欢迎访问ic37.com |
会员登录 免费注册
发布采购

ENC28J60-I/SO 参数 Datasheet PDF下载

ENC28J60-I/SO图片预览
型号: ENC28J60-I/SO
PDF下载: 下载PDF文件 查看货源
内容描述: 独立以太网控制器,SPI接口 [Stand-Alone Ethernet Controller with SPI Interface]
分类和应用: 微控制器和处理器串行IO控制器通信控制器外围集成电路光电二极管数据传输PC局域网以太网时钟
文件页数/大小: 96 页 / 1466 K
品牌: MICROCHIP [ MICROCHIP ]
 浏览型号ENC28J60-I/SO的Datasheet PDF文件第37页浏览型号ENC28J60-I/SO的Datasheet PDF文件第38页浏览型号ENC28J60-I/SO的Datasheet PDF文件第39页浏览型号ENC28J60-I/SO的Datasheet PDF文件第40页浏览型号ENC28J60-I/SO的Datasheet PDF文件第42页浏览型号ENC28J60-I/SO的Datasheet PDF文件第43页浏览型号ENC28J60-I/SO的Datasheet PDF文件第44页浏览型号ENC28J60-I/SO的Datasheet PDF文件第45页  
ENC28J60  
Additionally, the ENC28J60 requires a single per packet  
control byte to precede the packet for transmission. The  
per packet control byte is organized as shown in  
Figure 7-1. Before transmitting packets, the MAC  
registers which alter the transmission characteristics  
should be initialized as documented in Section 6.0  
“Initialization”.  
7.0  
7.1  
TRANSMITTING AND  
RECEIVING PACKETS  
Transmitting Packets  
The MAC inside the ENC28J60 will automatically gener-  
ate the preamble and start-of-frame delimiter fields when  
transmitting. Additionally, the MAC can generate any  
padding (if needed) and the CRC if configured to do so.  
The host controller must generate and write all other  
frame fields into the buffer memory for transmission.  
For an example of how the entire transmit packet and  
results will look in memory, see Figure 7-2.  
FIGURE 7-1:  
FORMAT FOR PER PACKET CONTROL BYTES  
PHUGEEN  
PPADEN  
PCRCEN POVERRIDE  
bit 0  
bit 7  
bit 7-4  
bit 3  
Unused  
PHUGEEN: Per Packet Huge Frame Enable bit  
When POVERRIDE = 1:  
1= The packet will be transmitted in whole  
0= The MAC will transmit up to the number of bytes specified by MAMXFL. If the packet is larger  
than MAMXFL, it will be aborted after MAMXFL is reached.  
When POVERRIDE = 0:  
This bit is ignored.  
bit 2  
PPADEN: Per Packet Padding Enable bit  
When POVERRIDE = 1:  
1= The packet will be zero padded to 60 bytes if it is less than 60 bytes  
0= The packet will be trasmitted without adding any padding bytes  
When POVERRIDE = 0:  
This bit is ignored.  
bit 1  
PCRCEN: Per Packet CRC Enable bit  
When POVERRIDE = 1:  
1= A valid CRC will be calculated and attached to the frame  
0= No CRC will be appended. The last 4 bytes of the frame will be checked for validity as a  
CRC.  
When POVERRIDE = 0:  
This bit is ignored.  
bit 0  
POVERRIDE: Per Packet Override bit  
1= The values of PCRCEN, PPADEN and PHUGEEN will override the configuration defined by  
MACON3  
0= The values in MACON3 will be used to determine how the packet will be transmitted  
© 2006 Microchip Technology Inc.  
Preliminary  
DS39662B-page 39  
 复制成功!