欢迎访问ic37.com |
会员登录 免费注册
发布采购

ENC28J60-I/SO 参数 Datasheet PDF下载

ENC28J60-I/SO图片预览
型号: ENC28J60-I/SO
PDF下载: 下载PDF文件 查看货源
内容描述: 独立以太网控制器,SPI接口 [Stand-Alone Ethernet Controller with SPI Interface]
分类和应用: 微控制器和处理器串行IO控制器通信控制器外围集成电路光电二极管数据传输PC局域网以太网时钟
文件页数/大小: 96 页 / 1466 K
品牌: MICROCHIP [ MICROCHIP ]
 浏览型号ENC28J60-I/SO的Datasheet PDF文件第39页浏览型号ENC28J60-I/SO的Datasheet PDF文件第40页浏览型号ENC28J60-I/SO的Datasheet PDF文件第41页浏览型号ENC28J60-I/SO的Datasheet PDF文件第42页浏览型号ENC28J60-I/SO的Datasheet PDF文件第44页浏览型号ENC28J60-I/SO的Datasheet PDF文件第45页浏览型号ENC28J60-I/SO的Datasheet PDF文件第46页浏览型号ENC28J60-I/SO的Datasheet PDF文件第47页  
ENC28J60  
TABLE 7-1:  
Bit  
TRANSMIT STATUS VECTORS  
Field  
Description  
55-52 Zero  
0
51  
Transmit VLAN Tagged Frame  
Frame’s length/type field contained 8100h which is the VLAN protocol  
identifier.  
50  
49  
48  
Backpressure Applied  
Carrier sense method backpressure was previously applied.  
The frame transmitted was a control frame with a valid pause opcode.  
The frame transmitted was a control frame.  
Transmit Pause Control Frame  
Transmit Control Frame  
47-32 Total Bytes Transmitted on Wire Total bytes transmitted on the wire for the current packet, including all  
bytes from collided attempts.  
31  
30  
29  
28  
Transmit Underrun  
Reserved. This bit will always be ‘0’.  
Transmit Giant  
Byte count for frame was greater than MAMXFL.  
Collision occurred beyond the collision window (MACLCON2).  
Transmit Late Collision  
Transmit Excessive Collision  
Packet was aborted after the number of collisions exceeded the  
retransmission maximum (MACLCON1).  
27  
26  
Transmit Excessive Defer  
Transmit Packet Defer  
Packet was deferred in excess of 24,287 bit times (2.4287ms).  
Packet was deferred for at least one attempt but less than an excessive  
defer.  
25  
24  
23  
22  
Transmit Broadcast  
Transmit Multicast  
Packet’s destination address was a broadcast address.  
Packet’s destination address was a multicast address.  
Transmission of the packet was completed.  
Transmit Done  
Transmit Length Out of Range  
Indicates that frame type/length field was larger than 1500 bytes (type  
field).  
21  
20  
Transmit Length Check Error  
Transmit CRC Error  
Indicates that frame length field value in the packet does not match the  
actual data byte length and is not a type field. MACON3.FRMLNEN  
must be set to get this error.  
The attached CRC in the packet did not match the internally generated  
CRC.  
19-16 Transmit Collision Count  
Number of collisions the current packet incurred during transmission  
attempts. It applies to successfully transmitted packets and as such, will  
not show the possible maximum count of 16 collisions.  
15-0  
Transmit Byte Count  
Total bytes in frame not counting collided bytes.  
© 2006 Microchip Technology Inc.  
Preliminary  
DS39662B-page 41  
 复制成功!