24AA02/24LC02B
1.0
ELECTRICAL CHARACTERISTICS
(†)
Absolute Maximum Ratings
VCC.............................................................................................................................................................................6.5V
All inputs and outputs w.r.t. VSS ......................................................................................................... -0.3V to VCC +1.0V
Storage temperature ...............................................................................................................................-65°C to +150°C
Ambient temperature with power applied................................................................................................-40°C to +125°C
ESD protection on all pins ......................................................................................................................................................≥ 4 kV
† NOTICE: Stresses above those listed under “Absolute Maximum Ratings” may cause permanent damage to
the device. This is a stress rating only and functional operation of the device at those or any other conditions
above those indicated in the operational listings of this specification is not implied. Exposure to maximum rating
conditions for extended periods may affect device reliability.
TABLE 1-1:
DC CHARACTERISTICS
Industrial (I):
TA = -40°C to +85°C, VCC = +1.7V to +5.5V
DC CHARACTERISTICS
Automotive (E): TA = -40°C to +125°C, VCC = +2.5V to +5.5V
Param.
Sym.
No.
Characteristic
Min.
Typ.
Max.
Units
Conditions
D1
D2
D3
D4
VIH
—
WP, SCL and SDA pins
High-level input voltage
Low-level input voltage
—
—
—
—
—
—
—
—
V
—
0.7 VCC
—
—
VIL
0.3 VCC
—
V
—
VHYS
Hysteresis of Schmitt
Trigger inputs
0.05 VCC
V
(Note)
D5
D6
D7
D8
VOL
ILI
Low-level output voltage
Input leakage current
Output leakage current
—
—
—
—
—
—
—
—
0.40
±1
V
IOL = 3.0 mA, VCC = 2.5V
VIN = VSS or VCC
μA
μA
pF
ILO
±1
VOUT = VSS or VCC
CIN,
Pin capacitance
10
VCC = 5.0V (Note)
COUT
(all inputs/outputs)
TA = 25°C, FCLK = 1 MHz
D9
ICC write Operating current
—
—
0.1
3
1
mA
mA
VCC = 5.5V, SCL = 400 kHz
—
D10
D11
ICC read
0.05
ICCS
Standby current
—
—
0.01
—
1
5
μΑ
μΑ
Industrial
Automotive
SDA = SCL = VCC
WP = VSS
Note:
This parameter is periodically sampled and not 100% tested.
DS21709J-page 2
© 2009 Microchip Technology Inc.
MICROCHIP [ MICROCHIP ]
