10.2 I/O Pins Used with ADC Function
The Port 1 serves as the alternate function of the ADC analog input. In order to get the best analog performance,
the pins that are being used with the ADC should have their digital outputs disabled. This can be achieved by
putting the port pins into the Input-Only mode.
10.3 Additional Note for I/O Port
Every output on the MPC82G516A has been designed to sink typical LED drive current. However, there is a
maximum total output current for all ports which must not be exceeded. Please refer to Section 29: Absolute
Maximum Ratings.
39
MPC82G516A Data Sheet
MEGAWIN
MEGAWIN [ MEGAWIN TECHNOLOGY CO., LTD ]
