24.4 Software Reset
Writing ‘1’ to bit SWRST will trigger a software reset, which causes the MCU to re-boot from the AP-memory or
the ISP-memory according to the SWBS bit. See the ISPCR register shown below.
ISPCR (Address=E7H, ISP Control Register, Reset Value=000x,x000B)
Bit-7
Bit-6
Bit-5
Bit-4
Bit-3
Bit-2
Bit-1
Bit-0
ISPEN
SWBS SWRST
-
-
CKS2
CKS1
CKS0
SWBS: Software boot select. Set/clear to select booting from ISP-memory/AP-memory for software reset.
SWRST: Write ‘1’ to this bit to trigger a software reset.
24.5 Brownout Reset from Power Monitor
To trigger an internal reset when brownout occurs, the hardware option ENLVRO or ENLVRC should be enabled.
(Refer to Section 25: MCU’s Hardware Option).
MEGAWIN
MPC82G516A Data Sheet
118
MEGAWIN [ MEGAWIN TECHNOLOGY CO., LTD ]
