Ribbon Cable Interconnect Solutions
Introduction (Continued)
Mass termination capabili- Ribbon Cable Solutions are ductor and the .0152 [0.382]
board and board-to-board
interconnections. Its design
prevents the traditional
ties of the ribbon cable
connectors have helped
make ribbon cable, and
particularly .050 [0.127]
centerline cable, popular
within the Electronics
Industry. The ability to termi-
nate up to 64 conductors
simultaneously, without
stripping or otherwise pre-
paring the cable, presents
obvious labor savings.
available on three separate
cable centerline spacings.
They include:
posts on .050 x .100 [1.27 x
2.54] grid. Also available in
paddleboard configurations. failure mode in tin-plated
connections, fretting corro-
.025 [0.64] Centerlines
2.0 mm [.079] ribbon
sion. An additional position-
I
I
I
System 50 receptacles
System 50 paddleboards
Pin headers
cable receptacles feature
ing spring in the female part
contacts on a true 2.0 mm
absorbs relative movements
[.079 in.] mating grid for
caused by vibrations and
1.0 mm [.039 in.] pitch
.039 [1.00] Centerlines
thermal expansion between
ribbon cable. Select
I
2.0 mm receptacles
Breakaway pin headers
male and female contacts.
configurations are available
I
By preventing movements
between 8 and 50-positions.
on the contact spot, a gas
Receptacles feature
.050 [1.27] Centerlines
tight connection can be
insulation displacement
I
I
I
50/50 Grid connectors
Micro-MaTch connectors
Novo Receptacle
connectors
Ribbon Cable Connectors
are wire-to-board devices
used to make the transition
between cable and pc
board circuitry. They find
heavy use within equipment
to connect one board to
another or one subsystem
to another. The connectors
are also used in input/out-
put applications, connecting
different pieces of equipment.
guaranteed under all
contacts (IDC).
circumstances.
50/50 Grid connectors
Novo receptacles feature
Although AMPMODU 50/50
I
I
DIP plugs
two rows of contacts on
Grid Vertical Headers and
EUROLATCH receptacle
connectors per DIN
41612 and IEC 603-2
Pin Headers
.100 x .100 [2.54 x 2.54]
Receptacles are designed
centers on selected sizes
for parallel board-to-board
of 10 thru 64-positions
stacking in high density
I
and mate with .025 [0.64]
applications, Right-angle
square or round posts. The
board-to-board and cable-
System 50 ribbon cable
receptacles will terminate
cable on .025 [0.64] center-
lines. They are available in
select sizes from 20 thru
100-positions, and accept
wire size range 30 AWG
[0.05 mm2] solid or
stranded wire and 32 AWG
[0.03 mm2] stranded pvc
insulated wire. Housing and
cover are made of high tem-
perature tolerant thermo-
plastic material, black, UL
94V-0 rated. A single mating
beam, phosphor bronze
contact provides the inter-
connect between the con-
Novo tuning-fork contact
to-board applications are
offers a military-approved
also possible since the
design, at an affordable
vertical receptacles also
cost. Polarization options
mate with non-latching
include military, center and
right-angle headers and the
military, or dual bar.
vertical headers also mate
with non-latching cable con- DIP (Dual In-Line Package)
nectors.
plugs provide a permanent
connection of ribbon cable
to a pc board or mating
to DIP sockets. Using the
same centerline dimensions
as DIP integrated circuits,
DIP plugs offer space
Micro-Match connectors
Miniaturization and the trend
towards higher density of
electronic functions on a
substrate led to the intro-
duction of Micro-MaTch. The
system offers a range of
board and wire connectors,
enabling a variety of wire-to-
efficiency and a low profile
of .253 [6.43].
Need more information?
Call Technical Support at
the numbers listed below.
Technical Support is staffed
with specialists well versed
in all TE products. They can
provide you with:
I Technical Support
I Catalogs
I Technical Documents
I Product Samples
I TE Authorized Distributor
Locations
5
Catalog 82012
Revised 4-12
Dimensions are shown for
Dimensions are in inches
Canada: +1 (905) 475-6222
UK: +44 (0) 800-267666
reference purposes only.
and millimeters unless
otherwise specified.
Mexico/C. Am.: +52 (0) 55-1106-0800
Latin/S. Am.: +54 (0) 11-4733-2200
Germany: +49 (0) 6251-133-1999
France: +33 (0) 1-3420-8686
Netherlands: +31 (0) 73-6246-999
China: +86 (0) 400-820-6015
Specifications subject
to change.
www.te.com
USA: +1 (800) 522-6752
MACOM [ Tyco Electronics ]
