MTA, CST-100 II, SL-156 and
AMP Economy Power (EP) Connectors
MTA Application Tooling Options (Continued)
Technical Documents
The following is a list of technical documents covering the installation, operation, adjustment,
maintenance and repair of MTA application tooling.
Instruction Sheets (IS) provide instructions for assembling or applying the product. They are
intended for the Manufacturing Assembler or Operator.
Customer Manuals (CM) provide complete, detailed instructions on the installation, operation,
adjustment, maintenance and repair of complex tools and application machines.
Applicator Instructions (AI) are similar to instruction sheets (which cover products and tools), and
provide instructions for installation, adjustment and maintenance of applicators used in auto-
matic and semiautomatic machines.
Hand Tools, Power Units & Accessories
Manual Arbor Frame (MTA-50)
Upper Tooling (MTA-50)
1583518-1
IS 408-8812
IS 408-8812
IS 408-6923
IS 408-6685
IS 408-6701
IS 408-6790
IS 408-9393
IS 408-4260
IS 408-4260
IS 408-7907
IS 408-7907
IS 408-7763
2700 lb Air Bench Machine
Terminator Assembly, "G" Term
AMP-O-LECTRIC Bench Machine
Conversion Kit
312522-1
354500-1
1-471273-3
690675-2
853542-1
854200-1
854468-1
854468-2
856600-1
856600-2
931800-1
CM 409-5843
CM 409-5842
CM 409-5128
IS 408-8022
IS 408-9636
IS 408-9650
IS 408-9687
IS 408-9687
IS 408-9745
IS 408-9745
CM 409-5746
1583514-1
58024-1
58039-1
58040-1
58074-1
58338-1
58575-1
58576-1
59803-1
59804-1
91112-2
Manual Arbor Frame Assembly
Ribbon Cable Applicator, .100
Ribbon Cable Applicator, .156
Manual Hand Tool
Base Assembly
Base
Air Bench Mount Tool
Adapter (AMP-O-LECTRIC)
Adapter (2700 lb Machine)
Repair Kit
Air Hand Tool (MTA-100)
Air Harness Tool (MTA-156)
T-Handle Maintenance Tool (MTA-100)
T-Handle Maintenance Tool (MTA-156)
Air Arbor Frame Assembly
Repair Kit
Electric Bench Mount Tool
One-At-A-Time Termination Tooling
Interchangeable Heads
MTA-50
Interchangeable Head & Loose Piece Feed Track
MTA-100
MTA-156
MTA-156
IS 408-9466
1583503-1
IS 408-8801
58247-1
58247-2
58247-3
58443-1
58061-1
58082-1
58392-1
IS 408-6930
IS 408-9380
IS 408-4146
IS 408-9607
IS 408-6794
IS 408-6795
IS 408-9450
933567-1
IS 408-9435
933568-1
MTA-100
Interchangeable Heads & Tape Feed Track
MTA-100
58246-1
58246-2
58246-3
58442-1
58638-1
IS 408-6929
IS 408-9379
IS 408-4147
IS 408-9603
IS 408-4358
MTA-156
IS 408-9637
853546-1
IS 408-9636
AI 408-8054
853547-1
Special Applicators
MTA-100
MTA-156
466728-1
466727-1
567020-1
AI 408-8054
AI 408-8069
Mass Termination Tooling
Die Set Assembly
MTA-50
MTA-100
MTA-156
MTA-100
1583515-1
1583515-2
1583516-1
1583516-2
1583517-1
IS 408-8812
IS 408-8812
IS 408-8812
IS 408-8812
IS 408-8812
58242-1
58242-3
58243-1
58635-1
58636-1
58644-1
58644-2
59844-1
59845-1
59845-3
IS 408-7994
IS 408-7994
IS 408-7994
IS 408-7994
IS 408-7994
IS 408-4406
IS 408-4440
IS 408-7994
IS 408-7994
IS 408-7994
58009-1
58009-2
58010-2
58244-1
58244-3
58245-1
58245-3
58646-1
58646-2
59848-1
59848-3
IS 408-7995
IS 408-7995
IS 408-7995
IS 408-7995
IS 408-7995
IS 408-7995
IS 408-7995
IS 408-4405
IS 408-4439
IS 408-7995
IS 408-7995
854175-1
854176-1
IS 408-9667
MTA-156
IS 408-9650
Produce 6-in. [15 cm] Long Jumpers, One 4-Position
MTA-100 Connector per End, Discrete Wire
Produce 6-in. [15 cm] Long Jumpers, One 4-Position
MTA-100 Connector per End, Ribbon Cable*
Typical Application Rates
Terminations
Per Hour
Terminations
Per Hour
Method
Method
Manual Hand Tool 58074-1 with
2700 lb Air Bench Machine 312522-1 with
—
Interchangeable Head 58246-1
Applicator and Tape Feed Track
854175-1 and 854200-1 (Base)
7,500
Electric Bench Machine 931800-1 with
900
Interchangeable Head 58246-1
* Procedure: Mass terminate 12-conductor ribbon cable with three
connectors per end. After terminating, separate by tearing the
12-conductor assembly into three 4-conductor assemblies.
Electric Bench Machine 931800-1 with
Interchangeable Head and
1,100
1,250
Loose-Piece Feed Track 933567-1
Electric Bench Machine 931800-1 with
Interchangeable Head and Tape Feed Track
853546-1 and 853542-1 (Base)
Cable Notching
Cable Ends
Per Hour
Method
2700 lb Air Bench Machine 312522-1 with
Apply One 4-Position MTA-100 Feed-Thru
Connector per Assembly, Discrete Wire
Ribbon Cable Notcher Assembly 854449-2
and 854468-2 (Adapter)
1,000
Terminations
Per Hour
Method
Manual Bench Tool 58024-1 with
Applicator and Holding Fixture
650
For further information about tooling call Technical Support.
79
Catalog 82056
Revised 6-08
Dimensions are in inches and
Dimensions are shown for
USA: 1-800-522-6752
South America: 55-11-2103-6000
Hong Kong: 852-2735-1628
Japan: 81-44-844-8013
millimeters unless otherwise
reference purposes only.
Specifications subject
to change.
Canada: 1-905-470-4425
Mexico: 52-55-1106-0800
C. America: 57-1-254-4444
specified. Values in brackets
are metric equivalents.
www.tycoelectronics.com
UK: 44-208-420-8341