MTA, CST-100 II, SL-156 and
AMP Economy Power (EP) Connectors
MTA Application Tooling Options (Continued)
Mass Termination Tooling
(Typical Tooling
Combinations)
Manual Bench Tool with
Applicator and Holding Fixture
Air Harness Tool with
Applicator
Air Bench Machine
2700 lb Air Bench Machine with
Ribbon Cable Notcher Assembly
Power Units
Manual Bench Tool —
Arbor Frame Assembly
Part No. 58024-1
Air Harness Tools —
Air Bench Machine —
Pneumatic Unit
2700 lb Air Bench Machine —
Part No. 312522-1
Hand-Held Power Unit
with Applicator
Part No. 91112-2
I Operated by a foot
switch
Part No. 58575-1 (MTA-100)
Part No. 58576-1 (MTA-156)
I Applicator and holding
fixture can be oriented for
operator convenience for
closed-end or feed-thru
terminations
I Ram height (insertion
depth) is easily adjusted
I Operated by a foot
switch
I Capable of exerting
2,700 lb [12,000 N] of
force at minimum 80 psi
[5.52 bar] air pressure
I Applicator can be rotated
360° for orientation with
holding fixture
I Insertion depth is easily
adjusted
I Operates at air pressure
between 75 and 95 psi
[5.17 and 6.55 bar]
I Operates at air pressure
between 80 and 90 psi
[5.52 and 6.21 bar]
I Not recommended for
notching cable with more
than 14 conductors
I May be bench mounted
I May be bench mounted
Applicators and Notcher Assemblies
Ribbon Cable Notcher Assembly
I Notch cable with up to
28 conductors for .100
centerline, and 24
conductors for .156
centerline
I Pressure plate holds
cable in position during
notching
Manual Bench Tool with Applicator and Tape Feed Track
I Scrap conveniently
removed through a chute
with a blast of air from a
built-in air valve
Ribbon Cable Notcher
Assembly
Applicator and Holding Fixture
Applicator and Tape Feed Track
I Wires are laced into
plastic combs for mass
termination
I Trims excess wire for
closed-end terminations
I Holding fixture may be
mounted to a harness
board
I Tape-mounted connectors
are transferred from prod-
uct reel to feed track by
simply pulling on the free
end of the carrier tape
I Connectors are fed using
a simple spring-loaded
pusher
Wire Size
Part Number
854449-2
Centerline
Used With
AWG
.100
2.54
Manual Bench Tool
58024-1
Air Bench Machine
91112-2
26-28
.100
2.54
854449-4
22-28
2700 lb Bench Machine
312522-1
I Feed stop easily adjusted
for different connector
sizes
.156
3.96
854449-3
18-24
AMP-O-LECTRIC
Bench Machine 1-471273-3
(with Conversion Kit 690675-2)
Use Adapter 854468-1 when putting Notcher in the AMP-O-LECTRIC
Machine. Use Adapter 854468-2 when putting Notcher in the 2700 lb
Air Bench Machine.
78
Catalog 82056
Revised 6-08
Dimensions are in inches and
Dimensions are shown for
USA: 1-800-522-6752
South America: 55-11-2103-6000
millimeters unless otherwise
reference purposes only.
Specifications subject
to change.
Canada: 1-905-470-4425
Mexico: 52-55-1106-0800
C. America: 57-1-254-4444
Hong Kong: 852-2735-1628
Japan: 81-44-844-8013
UK: 44-208-420-8341
specified. Values in brackets
are metric equivalents.
www.tycoelectronics.com
MACOM [ Tyco Electronics ]
