MTA, CST-100 II, SL-156 and
AMP Economy Power (EP) Connectors
MTA Application Tooling Options (Continued)
One-At-A-Time Termination
Tooling (Typical Tooling
Combinations)
Manual Hand Tool with
Interchangeable Head
Air Hand Tool with
Interchangeable Head
Air Bench Mount Tool with
Interchangeable Head and
Foot Switch
Electric Bench Machine with
Interchangeable Head
Power Units
Manual Hand Tool —
Pistol Grip Handle
Part No. 58074-1
Air Hand Tool —
Pistol Grip Pneumatic Handle
Part No. 58075-1
Air Bench Mount Tool —
Bench Mount Power Assembly
Part No. 58338-1
Electric Bench Machine —
IDC Power Unit
Part No. 931800-1
I Easy to use
I Light weight
I May be mounted with
interchangeable head
pointed up or down
I Operated by a foot
switch
I Operates at air pressure
between 40 and 70 psi
[2.76 and 4.83 bar]
I All electric: 120 VAC,
60 Hz, 2 A
I Ratchet control will not
release the trigger until it
is fully bottomed
I Head may be rotated for
user convenience
I Operates at air pressure
between 40 and 70 psi
[2.76 and 4.83 bar]
I Head may be rotated for
user convenience
I Compact, portable and
quiet
I Operated by a foot
switch
Electric Bench Machine with
Interchangeable Head and
Tape Feed Track
AMP-O-LECTRIC Bench
Machine with Special Applicator
Air Bench Mount Tool with
Interchangeable Head and Loose-Piece Feed Track
Interchangeable Heads and Applicators (Refer to page 76 for part numbers.)
Special Applicator
Interchangeable Head
Interchangeable Head and
Loose-Piece Feed Track
Interchangeable Head and
Tape Feed Track
I Connectors are easily
hand loaded into feed
track
I Automatically advances
the connector after each
termination
I Cannot be cycled until
the connector is properly
positioned
I Terminates one
unstripped wire per cycle
I No special setup required I No special setup required
I Connectors are easily
loaded into feed track
I Connectors are fed using
a simple spring-loaded
pusher
I Aligns and holds the
connector in place for
each termination
I Automatically advances
the connector after each
termination
I Tape-mounted connectors
are transferred from prod-
uct reel to feed track by
simply pulling on the free
end of the carrier tape
I Connectors are fed using
a simple spring-loaded
pusher
T-Handle Maintenance Tool
77
Catalog 82056
Revised 6-08
Dimensions are in inches and
Dimensions are shown for
USA: 1-800-522-6752
South America: 55-11-2103-6000
Hong Kong: 852-2735-1628
Japan: 81-44-844-8013
millimeters unless otherwise
reference purposes only.
Specifications subject
to change.
Canada: 1-905-470-4425
Mexico: 52-55-1106-0800
C. America: 57-1-254-4444
specified. Values in brackets
are metric equivalents.
www.tycoelectronics.com
UK: 44-208-420-8341
MACOM [ Tyco Electronics ]
