NOTE: All part numbers
are RoHS Compliant
AMP M Series
Pin and Socket Connectors
Cable-to-Panel (Continued)
1. Confirm that Application E (at left) most closely meets
your requirements. (Other applications are shown on
pages 10-17 and 20 through 25.)
Special application housings and posted housings may be
substituted for these standard housings. See Special
Application and Posted Connectors Sections.
2. Find the appropriate column for the number of positions
required.
This cable-to-panel application utilizes locking springs, strain
relief clamps, a pin hood for pin protection and guide hard-
ware.
3. Select part numbers required for the application listed
in the column below the number of positions.
If a part number is not listed for a particular item, it is
not available.
The 34 and 50 position connectors can be used with either
center or corner guide hardware. If center guide hardware is
used, an additional four 4-40 screws, nuts and lockwashers
are required to secure the locking springs. Corner guides
require four guide pins and four guide sockets for each mated
pair of connectors.
If more than one part number is listed for a particular
hardware item, choose the one which best fits your appli-
cation.
4. Dimensional information is available on the indicated
pages under description column.
5. Select Contacts: Type II (page 30), Type III+ (pages 31
through 35) or Subminiature Coaxial (pages 40, 41).
Number of Positions
Component Description
160 CF
41
50
201358-1
200277-2
201358-3
200277-4
—
75
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
104
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
104 CF
202135-2
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
Plug Block
Receptacle Block
}
}
}
Phenolic
201302-1
—
STANDARD
HOUSINGS
202135-4
—
Plug Block
Receptacle Block
Diallyl Phthalate
Polyester
201302-3
—
Pages 44 to 51
—
1-201692-6
Plug Block
Receptacle Block
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
Long
Short
STRAIN
RELIEF
CLAMPS
Page 88
Nickel Plated Steel
Stainless Steel
}
}
—
201182-4
201847-1
—
201766-1
Long
Short
—
200389-2
200389-2
200390-9
1-200833-1
1-200835-1
201925-1
201926-1
—
Center Male
GUIDE
HARDWARE
Page 81
200390-9
Center Female
Corner Male
Stainless Steel
—
}
—
Corner Female
1
201921-1
Male—Nickel Plated Spring Steel
Female—Stainless Steel
LOCKING SPRINGS
Page 80
201922-1
—
—
—
—
Internal Open End
Nickel Plated Steel
—
Internal Closed End Nickel Plated Steel
External Closed End Al Iridite
External Closed End Nickel Plated Steel
PIN HOODS
Pages 82 and 83
—
—
19
Catalog 82003
Revised 06-08
Dimensions are in millimeters
and inches unless otherwise
specified. Values in brackets are
equivalent U.S. Customary Units.
Dimensions are shown for
reference purposes only.
Specifications subject
to change.
USA: 1-800-522-6752
South America: 55-11-3611-1514
Hong Kong: 852-2735-1628
Japan: 81-44-844-8013
UK: 44-141-810-8967
Canada: 1-905-470-4425
Mexico: 01-800-733-8926
C. America: 52-55-5-729-0425
www.tycoelectronics.com
MACOM [ Tyco Electronics ]
