NOTE: All part numbers
are RoHS Compliant
AMP M Series
Pin and Socket Connectors
Cable-to-Cable (Continued)
1. Confirm that Application D (at left) most closely meets
your requirements. (Other applications are shown on
pages 10-15 and 18 through 25.)
Special application housings may be substituted for these
standard housings. See Special Application Section.
2. Find the appropriate column for the number of positions
required.
This cable-to-cable application utilizes jackscrews, a two-
piece short shield, a strain relief clamp, a pin hood for pin
protection and guide hardware.
3. Select part numbers required for the application listed
in the column below the number of positions.
Do not use a pin hood in combination with the shield for sizes
20, 26 and 41. A long shield may be used in lieu of pin hood
for pin protection for all sizes except the 20 position. Shields
are available with 180° cable exit and for the 50 through 104
position connectors, a 90° cable exit.
If a part number is not listed for a particular item, it is
not available.
If more than one part number is listed for a particular
hardware item, choose the one which best fits your appli-
cation.
Select the appropriate jackscrew length for the type of shield
chosen as indicated by symbol ().
4. Dimensional information is available on the indicated
pages under description column.
5. Select Contacts: Type II (page 30), Type III+ (pages 31
through 35) or Subminiature Coaxial (pages 40, 41).
Number of Positions
Component Description
160 CF
41
50
201358-1
200277-2
201358-3
200277-4
—
75
104
104 CF
202135-2
201310-1
201345-1
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
Plug Block
Receptacle Block
Phenolic
}
}
}
201302-1
201311-1
201037-1
—
STANDARD
HOUSINGS
202135-4
201310-3
201345-2
—
Plug Block
Receptacle Block
Diallyl Phthalate
Polyester
201302-3
201311-3
—
—
Pages 44 to 51
—
—
—
1-201692-6
Plug Block
Receptacle Block
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
201443-1
201443-2
200532-1
200532-2
—
—
—
Al Anodized
180° Two-
Piece Long
}
202383-2
202713-2
—
Nickel Plated Steel
Al Anodized
—
—
—
180° Two-
Piece Short
202383-1
202713-1
—
Nickel Plated Steel
Nickel Plated Cast Al
}
—
—
201131-1
—
203975-2
203975-1
—
202711-3
—
90° Two-Piece Long
90° Two-Piece Short
45° Two-Piece Short
45° Two-Piece Deep
180° One-Piece Long
180° One-Piece Short
90° One-Piece Short
SHIELDS
Pages 84 to 87
—
202711-1
—
—
—
—
Nickel
Plated
Steel
—
—
—
—
—
—
—
—
—
}
—
—
—
—
—
—
—
201849-3
—
—
—
—
Long
Short
STRAIN
RELIEF
CLAMPS
Page 88
Nickel Plated Steel
Stainless Steel
}
}
—
201182-4
201847-1
—
200730-4
201848-5
—
201766-1
—
Long
Short
—
—
201092-4
201092-4
201089-4
207234-1
207235-1
201413-4
201414-4
—
201092-4
201089-4
207234-1
207235-1
201413-4
201414-4
—
201092-4
201089-4
207234-1
207235-1
201413-4
201414-4
—
Fixed Male
Stainless Steel
}
201089-4
Fixed Female
—
Long-Long Male
—
Long-Long Female
Long Male
1
JACKSCREWS
Tip:
Stainless Steel
201413-4
Pages 78 and 79
201414-4
Long Female
Body:
—
—
—
—
—
—
—
—
—
—
Short-Short Male
Short-Short Female
Center Male
Die Cast Zinc
}
—
—
—
—
—
—
GUIDE
HARDWARE
Page 81
—
—
—
Center Female
Corner Male
Stainless Steel
1-200833-1
1-200835-1
—
1-201046-2
201047-2
—
1-201046-2
201047-2
—
}
Corner Female
Internal Open End
Nickel Plated Steel
202394-2
—
201369-4
—
201364-4
—
Internal Closed End Nickel Plated Steel
PIN HOODS
Pages 82 and 83
External Closed End Al Iridite
201390-5
201368-4
201346-4
External Closed End Nickel Plated Steel
17
Catalog 82003
Revised 06-08
Dimensions are in millimeters
and inches unless otherwise
specified. Values in brackets are
equivalent U.S. Customary Units.
Dimensions are shown for
reference purposes only.
Specifications subject
to change.
USA: 1-800-522-6752
South America: 55-11-3611-1514
Hong Kong: 852-2735-1628
Japan: 81-44-844-8013
UK: 44-141-810-8967
Canada: 1-905-470-4425
Mexico: 01-800-733-8926
C. America: 52-55-5-729-0425
www.tycoelectronics.com
MACOM [ Tyco Electronics ]
