NOTE: All part numbers
are RoHS Compliant
AMP M Series
Pin and Socket Connectors
Cable-to-Panel (Continued)
1. Confirm that Application G (at left) most closely meets
your requirements. (Other applications are shown on
pages 10-21 and 24, 25.)
Special application housings and posted housings may be
substituted for these standard housings. See Special
Application and Posted Connectors Sections.
2. Find the appropriate column for the number of positions
required.
This cable-to-panel application utilizes locking springs,
one-piece shields, a pin hood for pin protection and guide
hardware. The shields are available with both 180° and 90°
cable exits. The 180° shields are available in a long version
which provides pin protection in lieu of a pin hood.
3. Select part numbers required for the application listed
in the column below the number of positions.
If a part number is not listed for a particular item, it is
not available.
If more than one part number is listed for a particular
hardware item, choose the one which best fits your appli-
cation.
Do not select a long shield and a pin hood.
The 34 and 50 position connectors can be used with either
center or corner guide hardware. If center guides are used, an
additional four 4-40 screws are required to secure the locking
springs. If corner guides are used, an additional two 4-40
screws will be required to attach the shield. Corner guides
require four guide pins and four guide
4. Dimensional information is available on the indicated
pages under description column.
5. Select Contacts: Type II (page 30), Type III+ (pages 31
through 35) or Subminiature Coaxial (pages 40, 41).
sockets for each mated pair.
Number of Positions
Component Description
160 CF
41
50
75
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
104
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
104 CF
202135-2
201358-1
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
Plug Block
Receptacle Block
Phenolic
}
}
}
201302-1
200277-2
—
STANDARD
HOUSINGS
Pages 44 to 51
202135-4
201358-3
—
Plug Block
Receptacle Block
Diallyl Phthalate
Polyester
201302-3
200277-4
—
—
—
1-201692-6
Plug Block
Receptacle Block
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
Al Anodized
180° Two-
Piece Long
}
—
—
Nickel Plated Steel
Al Anodized
—
—
180° Two-
Piece Short
—
—
Nickel Plated Steel
Nickel Plated Cast Al
}
—
—
—
—
90° Two-Piece Long
90° Two-Piece Short
45° Two-Piece Short
45° Two-Piece Deep
180° One-Piece Long
180° One-Piece Short
90° One-Piece Short
Center Male
SHIELDS
Pages 84 to 87
—
—
—
—
Nickel
Plated
Steel
—
—
—
—
}
—
—
—
—
200389-2
200389-2
200390-9
1-200833-1
1-200835-1
201925-1
201926-1
—
GUIDE
HARDWARE
Page 81
200390-9
Center Female
Stainless Steel
—
Corner Male
}
—
Corner Female
1
201921-1
Male—Nickel Plated Spring Steel
Female—Stainless Steel
LOCKING SPRINGS
Page 80
201922-1
—
—
—
—
Internal Open End
Nickel Plated Steel
—
Internal Closed End Nickel Plated Steel
External Closed End Al Iridite
PIN HOODS
Pages 82 and 83
—
—
External Closed End Nickel Plated Steel
23
Catalog 82003
Revised 06-08
Dimensions are in millimeters
and inches unless otherwise
specified. Values in brackets are
equivalent U.S. Customary Units.
Dimensions are shown for
reference purposes only.
Specifications subject
to change.
USA: 1-800-522-6752
South America: 55-11-3611-1514
Hong Kong: 852-2735-1628
Japan: 81-44-844-8013
UK: 44-141-810-8967
Canada: 1-905-470-4425
Mexico: 01-800-733-8926
C. America: 52-55-5-729-0425
www.tycoelectronics.com
MACOM [ Tyco Electronics ]
