®
LY61L1288
128K X 8 BIT HIGH SPEED CMOS SRAM
Rev. 1.5
WRITE CYCLE 1 (WE# Controlled) (1,2,3,5,6)
tWC
Address
tAW
CE#
tCW
tAS
tWP
tWR
WE#
Dout
Din
tWHZ
TOW
High-Z
(4)
(4)
tDW
tDH
Data Valid
WRITE CYCLE 2 (CE# Controlled) (1,2,5,6)
tWC
Address
tAW
CE#
tAS
tWR
tCW
tWP
WE#
Dout
Din
tWHZ
High-Z
(4)
tDW
tDH
Data Valid
Notes :
1.WE#, CE# must be high during all address transitions.
2.A write occurs during the overlap of a low CE#, low WE#.
3.During a WE# controlled write cycle with OE# low, tWP must be greater than tWHZ + tDW to allow the drivers to turn off and data to be
placed on the bus.
4.During this period, I/O pins are in the output state, and input signals must not be applied.
5.If the CE# low transition occurs simultaneously with or after WE# low transition, the outputs remain in a high impedance state.
6.tOW and tWHZ are specified with CL = 5pF. Transition is measured ±500mV from steady state.
Lyontek Inc. reserves the rights to change the specifications and products without notice.
5F, No. 2, Industry E. Rd. IX, Science-Based Industrial Park, Hsinchu 300, Taiwan.
TEL: 886-3-6668838
FAX: 886-3-6668836
6
LYONTEK [ Lyontek Inc. ]
