KOA SPEER ELECTRONICS, INC.
SS-227 R2
8. Characteristics Cont.
Item
Requirement
Conditions
Humidity Resistance
(load)
Appearance: No physical damage
Capacitance: Within tolerance
Temp: 40°C 2°C
Humidity: 90 - 95%
Dielectric Loss: Within tolerance
Insulation Resistance: Within tolerance
Bias: 100% of rated voltage
Test Time: 500+24/-0 hour
Low Temperature
Resistance
Appearance: No physical damage
Capacitance: Within tolerance
Temp: -40°C 2°C
Test Time: 1000+48/-0 hour
(unload)
Dielectric Loss: Within tolerance
Insulation Resistance: Within tolerance
Vibration
Appearance: No physical damage
Capacitance: Within tolerance
Dielectric Loss: Within tolerance
Insulation Resistance: Within tolerance
The frequency of applied vibration should be
swept from 10 Hz to 55 Hz and return to 10 Hz.
This cycle time should be about 1 min and
this cycle should be repeated.
Amplitude (total Excursion): 1.5 mm
This motion shall be applied for period of
2 hours in each 3 mutually perpendicular
axes. (total of 6 hours)
After Temperature cycle test, High temperature resistance test, Humidity resistance test or
Low temperature resistance test, the tested sample should be measured after having left in
temperature from 15° to 35°C and relative humidity from 45% to 75% for 24 hours.
9. Packaging Specifications
9.1 Taping
Packaging of components on continuous tape is complete with
carrier tape for putting components and cover tape for sealing.
(1) Dimensions of Carrier Tape
15.75 (400)
6.30 (160)
6.30 (160)
Empty
Top tape
Empty
Tape running direction
PAGE 6 OF 8
ꢀ
ꢀ
ꢀ
ꢀ
ꢀ
ꢀ
Bolivar Drive
P.O. Box 547
Bradford, PA 16701
USA
814-362-5536
Fax 814-362-8883
www.koaspeer.com
Specifications given herein may be changed at any time without prior notice. Please confirm technical specifications before you order and/or use.