17 | Keysight | N9923A FieldFox RF Vector Network Analyzer - Data Sheet
Calibration Kits
The following is a list of the calibration kits that are loaded in a standard FieldFox. Users
can add additional calibration kits to their unit using FieldFox Data Link Software. Note
regarding QuickCal: The basic QuickCal, either 1 or 2-port does not require any stan-
dards. For higher accuracy, users can perform QuickCal with a load.
N9910X-800
N9910X-801
N9910X-802
N9910X-803
85031B
T-calibration kit, DC-6 GHz, Type-N(m)
T-calibration kit, DC-6 GHz, Type-N(f)
T-calibration kit, DC-6 GHz, 7/16 DIN(m)
T-calibration kit, DC-6 GHz, 7/16 DIN(f)
Economy calibration kit, DC to 6 GHz, 7 mm
Economy calibration kit, DC to 6 GHz, Type-N, 50-ohm
Standard calibration kit, DC to 9 GHz, Type-N, 50-ohm
Standard calibration kit, DC to 9 GHz, 3.5 mm
Standard calibration kit, DC to 3 GHz, Type-N 75-ohm
Economy calibration kit, DC to 3 GHz, Type-N 75-ohm
Standard calibration kit, DC to 7.5 GHz, 7-16
Economy calibration kit, DC to 3 GHz, Type-F, 75-ohm
Economy calibration kit, DC to 26.5 GHz, 3.5 mm
Standard calibration kit, DC to 18 GHz, Type-N, 50-ohm
Economy calibration kit, DC to 18 GHz, Type-N, 50-ohm
85032E
85032F
85033E
85036B
85036E
85038A
85039B
85052D
85054B
85054D
FieldFox Data Link Software
FieldFox Data Link software, installed on a PC, provides the following capabilities:
– Capture of current trace and setting
– Opening of data files (s1p, s2p, csv, sta, and png) residing on the instrument
– Editing cal kit and cable files on the instrument, or creating new cal kits and cables
– Transferring files to/from the instrument
– Annotating plots for documentation purposes
– Marker, limit line, and format changes on the PC
– Report generation
– Printing function
FieldFox Data Link Software is available from Keysight FieldFox Customer Support
http://www.keysight.com/find/fieldfoxsupport
Figure 11: FieldFox Data Link Software