06 | Keysight | N5393D PCI Express® 3.0 (Gen3) Software for Infiniium Oscilloscopes - Data Sheet
Easy Test Definition
Pick the standard you
want to test against
Choose the test point or specific
signal you want to test
The PCI Express electrical test software
extends the ease-of-use advantages
of Keysight’s Infiniium oscilloscopes to
testing PCI Express designs. The Keysight
automated test engine walks you quickly
through the steps required to define the
tests, set up the tests, perform the tests,
and view the test results. You can select
a category of tests all at once, or specify
individual tests. You can save tests and
configurations as project files and recall
them later for quick testing and review
of previous test results. Straightforward
menus let you perform tests with a
Test with SSC enabled or with a
clean clock (for compliance)
Choose half swing if testing low
power devices
De-embed test fixtures with the
optional InfiniiSim waveform
transformation toolset
minimum of mouse clicks.
The software allows you to easily specify
the test standard you want to use to test
the compliance of your device. This makes
test setup easy as only the appropriate
tests for the test point you pick are shown
on later test selection pages.
Figure 2. The software allows you to easily specify the test standard you want to use to test the
compliance of your device. This makes test setup easy as only the appropriate tests for the test
point you pick are shown on later test selection pages.
Test your reference clock
for phase jitter to help
ensure clean high data rate
transmissions
Easy to follow task flow
for configuring and
running tests
Select one test or a group
of tests with a single
mouse click
Figure 3. The Keysight automated test engine guides you quickly through selecting tests,
configuring tests, setting up the connection, running the tests, and viewing the results. Individual
tests or groups of tests are easily selected with a mouse click.
KEYSIGHT [ Keysight Technologies ]
