08 | Keysight | M924XA InfiniiVision PXIe Modular Oscilloscopes - Data Sheet
Additional Software for Added Functionality (Continued)
M9240PWRA power analysis application
Today’s power supply designers are facing
an increasing number of constraints
in the development of high-efficiency,
low-cost power supplies. The power
analysis application provides clear and
consistent reporting on the operation of
key operation parameters of your power
supply design.
Input measurements
– Power quality: Real power, apparent
power, reactive power, power factor,
crest factor (V and I), phase angle
– Current harmonics (based on IEC
61000-3-2 up to the 40th harmonic)
– Inrush current
Switching measurements
– Rds-on and Vce-sat
– Switching loss (power and energy)
– Slew rate (dv/dt and di/dt)
– Modulation (duty cycle, pulse-width,
period, frequency, versus time plot,
etc.)
Output measurements
– Output ripple
– Turn-on/turn-off time
– Transient response time
– Efficiency
Frequency response measurements
– Power supply rejection ratio (PSRR)
– Control loop response – Bode
M9240NFCA NFC triggering
Testing NFC-enabled devices is essential during the design validation and manufacturing
test phases to ensure quality and reliability of data transmission. This is especially
important when you consider that the data being transferred/exchanged between NFC-
enabled devices is often secured financial transactions. The M9240NFCA NFC trigger
application enables easy configuration to capture the signals of interest for NFC-A,
NFC-B and NFC-F messages.
KEYSIGHT [ Keysight Technologies ]
