06 | Keysight | M924XA InfiniiVision PXIe Modular Oscilloscopes - Data Sheet
Additional Software for Added Functionality
M9240AWGA WaveGen 20 MHz function/arbitrary waveform generator
The M924XA Series oscilloscopes offer
a 20-MHz built-in function/arbitrary
waveform generator. The WaveGen
provides standard stimulus output
waveforms to your device under test
as well as user-definable frequencies,
amplitudes, offset and pulse widths
and arbitrary waveform capability. The
WaveGen output is routed to a MMCX
connector on the front panel of the
oscilloscope.
Use the built-in waveform editor to create
custom waveforms to output on the
oscilloscope’s WaveGen. It is also possible
to capture a known good or ‘golden’
waveform on a scope channel and then
save that to the ARB so you can generate
it to stimulate your system under test.
M9240FRAA frequency response analyzer
Frequency response analysis is a critical
measurement to characterize the stability
of feedback networks and switch-mode
power supplies. This capability is achieved
with a gain and phase measurement
versus frequency (Bode plot). By using the
waveform generator output to stimulate
your design and probing the input and
output signals on channels 1 and 2, the
oscilloscope provides a clear report on the
gain and phase operation of the system.
KEYSIGHT [ Keysight Technologies ]
