24 | Keysight | InfiniiVision 1000 X-Series Oscilloscopes - Data Sheet
Performance Characteristics (Continued)
WaveGen – Built-in function waveform generator (specifications are typical) (Continued)
Note: Only available on WaveGen models EDUX1002G and DSOX1102G� WaveGen cannot be added to the other models�
EDUX1002G/DSOX1102G
Frequency
Sine wave and ramp accuracy:
– 130 ppm (frequency < 10 kHz)
– 50 ppm (frequency > 10 kHz)
Square wave and pulse accuracy:
– [50 + frequency/200] ppm (frequency < 25 kHz)
– 50 ppm (frequency ≥ 25 kHz)
Resolution: 0.1 Hz or 4 digits, whichever is larger
Square, Pulse, Ramp:
Amplitude
– 2 mVpp to 20 Vpp into Hi-Z (offset ≤ ±0.4 V)
– 1 mVpp to 10 Vpp into 50 Ω (offset ≤ ±0.4 V)
– 50 mVpp to 20 Vpp into Hi-Z (offset > ±0.4 V)
– 25 mVpp to 10 Vpp into 50 Ω (offset > ±0.4 V)
Sine:
– 2 mVpp to 12 Vpp into Hi-Z (offset ≤ ± 0.4 V)
– 1 mVpp to 9 Vpp into 50 Ω (offset ≤ ± 0.4 V)
– 50 mVpp to 12 Vpp into Hi-Z (offset > ± 0.4 V)
– 25 mVpp to 9 Vpp into 50 Ω (offset > ± 0.4 V)
Resolution: ≤ 1% of amplitude
Accuracy: 2% (Frequency = 1 kHz)
Square, pulse, ramp:
DC offset
– ± [10 V – ½ amplitude] into Hi-Z
– ± [5 V – ½ amplitude] into 50 Ω
Sine:
– ± [8 V – ½ amplitude] into Hi-Z
– ± [4.5 V – ½ amplitude] into 50 Ω
Resolution: Larger of 250 uV or 3 digits
Accuracy: ± 1.5% of offset setting ± 1.5% of amplitude ± 1 mV
Impedance: 50 Ω typical
Main output
Isolation: Not available, main output BNC is grounded
Protection: Overload automatically disables output
Sine, square, ramp, pulse, DC, noise