2.5 GB/S CWDM SFP TRANSCEIVER
5
Absolute Maximum Ratings
Parameter
Minimum
Maximum
Standard operating case temperature range
Extended operating case temperature range
Storage case temperature range
Supply voltage
Voltage on any input/output pin
High-speed output source current
Lead soldering temperature/time
Operating relative humidity (non-condensing)
Receiver optical input power
PIN
0 °C
-5 °C
-40 °C
-0.5 V
0 V
-
-
5%
70 °C
85 °C
85 °C
4.0 V
Vcc
50 mA
250 °C/10 seconds
85%
-
-
3 dBm
0 dBm
APD
Transceiver Electrical Input/Output Characteristics
Parameter
(Vcc = 3.3 V 5ꢀ)
Minimum
Maximum
Input data signal levels input voltage swing, DVIN (internally AC coupled)
Transmitter disable input (disabled/enabled)
Rate select input (high data rate/low data rate)
Transmitter fault output (asserted/deasserted)
Output data signal levels1 output voltage swing, DVOUT (internally AC coupled)
Loss-of-signal output (output high, VOH/output low, VOL)
200 mV
2000 mV
Vcc/0.8 V
Vcc/0.6 V
Vcc/0.5 V
2000 mV
Vcc/0.5 V
2.0 V/0 V
2.8 V/0 V
2.4 V/0 V
400 mV
2.4 V/0 V
1. Terminated into 100 Ω differential. These levels are guaranteed down to 2 dB lower than the typical receiver sensitivity for each data rate and reach.
JDSU [ JDSU ]
