Micro-D Coaxial/Power Combo - .050” Contact Spacing MDM
Cannon offers three options of the MDM Coaxial/Power Microminiature Connector:
MDM Coaxial: The MDM Metal Shell Connectors have been tooled in several coaxial layouts,
offering the versatility of combining coaxial & signal lines in the same connector.
MDM Power: The same insulator used with coaxial contacts is available with power contacts,
offering the versatility of combining power and signal lines in the same connector.
MDM Coaxial/Power: Power and coaxial contacts can be interchanged as desired.
How to Order (For MIL-DTL-83513 ordering information, see page 34 - 35}
-
P
-
XXX
R
MDM
51
P
H
001
RoHS Compliance
Series
Contact Arrangements
Contact Type
Termination Type
Termination Code
Hardware
Shell Finish Mod Codes
Series
Termination code*
MDM: (Size 9-100) Liquid Crystal Polymer (LCP)
(H) 001 - 18”,7/34 strand,#26 AWG, MIL-W-16878/4,
Type E Teflon, yellow.
(H) 003 - 18”, 7/34 strand, #26 AWG, MIL-W-16878/4,
Type E Teflon, color
Contact Arrangements
9-15-21-25-31-37-51-100 (standard)
16C5, 10C10, 7C2, 24C4 (coaxial) or combination of
coded to MIL-STD-681 System I.
16P5, 10P10, 7P2, 24P4 (power)
coax and power
(L) 1 - 1/2” uninsulated solid #25 AWG gold plated copper.
(L) 2 - 1” uninsulated solid #25 AWG gold plated copper.
Contact Type
P - Pin S - Socket
Shell Finish Modification Codes
No Number - (Standard cadmium/yellow chromate over nickel
A174 - Electroless nickel
A172 - Gold over nickel
A141 - Irridite/alodine
Termination Type
H - Harness-insulated wire.
L - Solid-uninsulated wire.
S - Solder pot to accept #26 AWG MAX. harness wire.
(Not available with power contact arrangements)
A30 - Black anodize
Hardware
M - Military specification hardware, see page 16
for military hardware codes.
P - Jackpost
K - Jackscrew-standard profile
L - Jackscrew-low profile
F - Float mount
B - No hardware standard.091 (2.31) dia. hole for
sizes 9-51; .120 (3.05) dia. hole for size 100.
A - .125 (3.18) dia. mounting holes for sizes 9-51; .166 (4.22) dia.
hole for size 100.
B1 - .1475 (3.75) dia. hole for size 100 (Per MIL-DTL-83513)
*See pp. 79-80 for additional termination codes.
Dimensions shown in mm
Specifications and dimensions subject to change
www.ittcannon.com
19
ITT [ ITT Cannon ]
