Microstrips .050” Contact Spacing
MT
Cannon Microstrips are available in three termination styles: solder cup, pigtail harness and
printed circuit leads. The MicroPin Contact System assures maximum performance in a minimum
design package. Available with latches or guide pins, our Microstrips provide an extremely dense
and reliable interconnection and offer greater application flexibility
Product Features
• High Performance MicroPin Contact System
• High-density .050” contact spacing
• Pre-wired for ease of installation
• Fully potted wire terminations
• Guide pins for alignment and polarizing
• Quick-disconnect latches
MicroPin Contact System
WIRE
SLEEVE
The Cannon MicroPin Contact System offers
uncompromised performance in downsized
interconnects. The beryllium copper pin
contact is fully recessed in the insulator, as-
suring positive contact alignment and robust
performance. The socket contact is precision
machined from high strength copper alloy
and features a smooth lead-in chamfer.
WIRE CRIMP
• 3 Amp current rating
• Precision crimp terminations
The MicroPin features seven points of electri-
cal contact. This contact system assures high
normal force, excellent wipe and superior
shock and vibration performance.
• Solder cup, pigtail or printed
circuit terminations
• Surface mount leads
Specifications
Current Rating
Dielectric Withstanding Voltage
Insulation Resistance
Contact Resistance
Operating Temperature
Durability
3 Amps max
600 VAC @ sea level; 300 VAC @ 70,000 feet altitude
5000 megohms min.
8 milliohms max.
MTV polyester -56°C to +125°C; MTB diallyl phthalate -55°C to +150°C
500 cycles min.
20 G’s
Shock/Vibration
Connector Mating Force
Latch Retention
(8 oz.) x (# of contacts)
5 lbs. min.
Wire Size
#26 AWG insulated wire, #25 AWG uninsulated solid wire. MT strips will also accommodate #24
AWG through #32 AWG.
For other wiring options contact the factory for ordering information.
General Performance requirements in accordance with MIL-DTL-83513
Materials and Finishes
Insulator
Contact
MTV: Glass-filled polyester per MIL-M-24519; MTB: Glass-filled diallyl phthalate per MIL-M-14
Copper Alloy per MIL-DTL-83513
Contact Finish
50 Microinches Min. Gold Plated per MIL-G-45204
#26 AWG. 19/38 Stranded, silver-plated copper, TFE Teflon insulation per MIL-W-16878/4
#25 AWG gold-plated copper per QQ-W-343
Insulated Wire
Uninsulated Solid Wire
Potting Material/Contact Encapsulant
Latch
Epoxy
300 series stainless steel, passivated
Dimensions shown in mm
Specifications and dimensions subject to change
www.ittcannon.com
65
ITT [ ITT Cannon ]
