IRFZ44VZS/LPbF
D
2
Pak Tape & Reel Infomation
TRR
1.60 (.063)
1.50 (.059)
4.10 (.161)
3.90 (.153)
1.60 (.063)
1.50 (.059)
0.368 (.0145)
0.342 (.0135)
FEED DIRECTION
1.85 (.073)
1.65 (.065)
11.60 (.457)
11.40 (.449)
15.42 (.609)
15.22 (.601)
24.30 (.957)
23.90 (.941)
TRL
10.90 (.429)
10.70 (.421)
1.75 (.069)
1.25 (.049)
16.10 (.634)
15.90 (.626)
4.72 (.136)
4.52 (.178)
FEED DIRECTION
13.50 (.532)
12.80 (.504)
27.40 (1.079)
23.90 (.941)
4
330.00
(14.173)
MAX.
60.00 (2.362)
MIN.
NOTES :
1. COMFORMS TO EIA-418.
2. CONTROLLING DIMENSION: MILLIMETER.
3. DIMENSION MEASURED @ HUB.
4. INCLUDES FLANGE DISTORTION @ OUTER EDGE.
26.40 (1.039)
24.40 (.961)
3
30.40 (1.197)
MAX.
4
Notes:
Limited by T
Jmax
, see Fig.12a, 12b, 15, 16 for typical repetitive
Repetitive rating; pulse width limited by
max. junction temperature. (See fig. 11).
avalanche performance.
Limited by T
Jmax
, starting T
J
= 25°C, L = 0.12mH
This value determined from sample failure population. 100%
R
G
= 25Ω, I
AS
= 34A, V
GS
=10V. Part not
tested to this value in production.
recommended for use above this value.
This is only applied to TO-220AB pakcage.
Pulse width
≤
1.0ms; duty cycle
≤
2%.
This is applied to D
2
Pak, when mounted on 1" square PCB (FR-
C
oss
eff. is a fixed capacitance that gives the
4 or G-10 Material). For recommended footprint and soldering
same charging time as C
oss
while V
DS
is rising
techniques refer to application note #AN-994.
from 0 to 80% V
DSS
.
TO-220AB package is not recommended for Surface Mount Application.
Data and specifications subject to change without notice.
This product has been designed and qualified for the Automotive [Q101]market.
Qualification Standards can be found on IR’s Web site.
IR WORLD HEADQUARTERS:
233 Kansas St., El Segundo, California 90245, USA Tel: (310) 252-7105
TAC Fax: (310) 252-7903
Visit us at www.irf.com for sales contact information. 11/04
12
www.irf.com