Page 6
Electrical Characteristics
Table 6. Recommended Operating Conditions for Stratix V Devices (Part 2 of 2)
Symbol
t
RAMP
Description
Power supply ramp time
Condition
Standard POR
Fast POR
Min
(4)
200 µs
200 µs
Typ
—
—
Max
(4)
100 ms
4 ms
Unit
—
—
Notes to
Table 6:
(1) V
CCPD
must be 2.5 V when V
CCIO
is 2.5, 1.8, 1.5, 1.35, 1.25 or 1.2 V. V
CCPD
must be 3.0 V when V
CCIO
is 3.0 V.
(2) If you do not use the design security feature in Stratix V devices, connect V
CCBAT
to a 1.2- to 3.0-V power supply. Stratix V power-on-reset (POR)
circuitry monitors V
CCBAT
. Stratix V devices will not exit POR if V
CCBAT
stays at logic low.
(3) C2L and I2L can also be run at 0.90 V for legacy boards that were designed for the C2 and I2 speed grades.
(4) The power supply value describes the budget for the DC (static) power supply tolerance and does not include the dynamic tolerance
requirements. Refer to the PDN tool for the additional budget for the dynamic tolerance requirements.
Table 7
lists the transceiver power supply recommended operating conditions for
Stratix V GX, GS, and GT devices.
Table 7. Recommended Transceiver Power Supply Operating Conditions for Stratix V GX, GS, and GT Devices
(Part 1 of 2)
Symbol
V
CCA_GXBL
(1), (3)
Description
Transceiver channel PLL power supply (left
side)
Transceiver channel PLL power supply (right
side)
Transceiver channel PLL power supply (right
side)
Transceiver hard IP power supply (left side;
C1, C2, I2, and I3YY speed grades)
Devices
GX, GS, GT
GX, GS
GT
GX, GS, GT
Minimum
2.85
2.375
2.85
2.375
2.85
0.87
Typical
3.0
2.5
3.0
2.5
3.0
0.9
Maximum
3.15
2.625
3.15
2.625
3.15
0.93
Unit
V
V
V
V
V
CCA_GXBR
(1), (3)
V
CCA_GTBR
V
CCHIP_L
Transceiver hard IP power supply (left side;
C2L, C3, C4, I2L, I3, I3L, and I4 speed
grades)
Transceiver hard IP power supply (right side;
C1, C2, I2, and I3YY speed grades)
GX, GS, GT
0.82
0.85
0.88
V
GX, GS, GT
0.87
0.9
0.93
V
V
CCHIP_R
Transceiver hard IP power supply (right side;
C2L, C3, C4, I2L, I3, I3L, and I4 speed
grades)
Transceiver PCS power supply (left side;
C1, C2, I2, and I3YY speed grades)
GX, GS, GT
0.82
0.85
0.88
V
GX, GS, GT
0.87
0.9
0.93
V
V
CCHSSI_L
Transceiver PCS power supply (left side;
C2L, C3, C4, I2L, I3, I3L, and I4 speed
grades)
Transceiver PCS power supply (right side;
C1, C2, I2, and I3YY speed grades)
GX, GS, GT
0.82
0.85
0.88
V
GX, GS, GT
0.87
0.9
0.93
V
V
CCHSSI_R
Transceiver PCS power supply (right side;
C2L, C3, C4, I2L, I3, I3L, and I4 speed
grades)
GX, GS, GT
0.82
0.82
0.85
0.85
0.90
1.0
1.05
0.88
0.88
0.93
1.03
1.07
V
V
CCR_GXBL
Receiver analog power supply (left side)
GX, GS, GT
0.87
0.97
1.03
V
Stratix V Device Datasheet
December 2015
Altera Corporation
INTEL [ INTEL CORPORATION ]
