Cyclone V Device Datasheet
CV-51002 | 2018.05.07
Symbol
Description
Condition
Minimum(11)
1.71
Typical
1.8
Maximum(11)
1.89
Unit
V
1.8 V
—
VCCPLL_HPS
VCC_AUX_SHARED
HPS PLL analog voltage regulator power supply
HPS auxiliary power supply
2.375
2.5
2.625
V
(14)
—
2.375
2.5
2.625
V
Related Information
Recommended Operating Conditions on page 8
Provides the steady-state voltage values for the FPGA portion of the device.
DC Characteristics
Supply Current and Power Consumption
Intel offers two ways to estimate power for your design—the Excel-based EPE and the Intel® Quartus® Prime Power Analyzer
feature.
Use the Excel-based EPE before you start your design to estimate the supply current for your design. The EPE provides a
magnitude estimate of the device power because these currents vary greatly with the resources you use.
The Intel Quartus Prime Power Analyzer provides better quality estimates based on the specifics of the design after you
complete place-and-route. The Power Analyzer can apply a combination of user-entered, simulation-derived, and estimated
signal activities that, when combined with detailed circuit models, yields very accurate power estimates.
Related Information
•
Early Power Estimator User Guide
Provides more information about power estimation tools.
•
Power Analysis chapter, Intel Quartus Prime Handbook
Provides more information about power estimation tools.
(11)
(14)
The power supply value describes the budget for the DC (static) power supply tolerance and does not include the dynamic tolerance
requirements. Refer to the PDN tool for the additional budget for the dynamic tolerance requirements.
VCC_AUX_SHARED must be powered by the same source as VCC_AUX for Cyclone V SX C5, C6, D5, and D6 devices, and Cyclone V SE A5
and A6 devices.
Cyclone V Device Datasheet
12
Send Feedback