8
HPS Power Supply Operating Conditions
CV-51002
2015.12.04
Related Information
•
Provides more information about the maximum full duplex channels recommended in Cyclone V GT and ST devices which require full
compliance to the PCIe Gen2 transmit jitter specification.
•
Provides more information about the maximum full duplex channels recommended in Cyclone V GT and ST devices for CPRI 6.144 Gbps.
HPS Power Supply Operating Conditions
Table 5: HPS Power Supply Operating Conditions for Cyclone V SX and ST Devices
This table lists the steady-state voltage and current values expected from Cyclone V system-on-a-chip (SoC) devices with ARM
®
-based hard processor
system (HPS). Power supply ramps must all be strictly monotonic, without plateaus. Refer to Recommended Operating Conditions for Cyclone V Devices
table for the steady-state voltage values expected from the FPGA portion of the Cyclone V SoC devices.
Symbol
Description
Condition
Minimum
(11)
Typical
Maximum
(11)
Unit
V
CC_HPS
HPS core voltage and periphery circuitry
power supply
HPS I/O pre-driver power supply
—
3.3 V
1.07
3.135
2.85
2.375
1.1
3.3
3.0
2.5
1.13
3.465
3.15
2.625
V
V
V
V
V
CCPD_HPS
(12)
3.0 V
2.5 V
(11)
(12)
The power supply value describes the budget for the DC (static) power supply tolerance and does not include the dynamic tolerance requirements.
Refer to the PDN tool for the additional budget for the dynamic tolerance requirements.
V
CCPD_HPS
must be 2.5 V when V
CCIO_HPS
is 2.5, 1.8, 1.5, or 1.2 V. V
CCPD_HPS
must be 3.0 V when V
CCIO_HPS
is 3.0 V. V
CCPD_HPS
must be 3.3 V
when V
CCIO_HPS
is 3.3 V.
Cyclone V Device Datasheet
Altera Corporation