Boxed Processor Specifications
7 Boxed Processor Specifications
The Celeron D processor is also offered as a boxed Intel processor. Boxed Intel processors are
intended for system integrators who build systems from baseboards and standard components. The
boxed Celeron D processor will be supplied with a cooling solution. This chapter documents
baseboard and system requirements for the cooling solution that will be supplied with the boxed
Celeron D processor. This chapter is particularly important for OEMs that manufacture baseboards
for system integrators. Unless otherwise noted, all figures in this chapter are dimensioned in
millimeters and inches [in brackets]. Figure 7-1 shows a mechanical representation of a boxed
Celeron D processor.
• Drawings in this section reflect only the specifications on the boxed Intel processor product.
These dimensions should not be used as a generic keep-out zone for all cooling solutions. It is
the system designer's responsibility to consider their proprietary cooling solution when
designing to the required keep-out zone on their system platform and chassis. Refer to the
Intel® Pentium 4 Processor on 90 nm Process Thermal Design Guidelines for further
guidance. Contact your local Intel Sales Representative for this document.
Figure 7-1. Mechanical Representation of the Boxed Intel® Celeron® D Processor
NOTE: The airflow of the fan heatsink is into the center and out of the sides of the fan heatsink.
Datasheet
73
INTEL [ INTEL ]
