A10-DATASHEET
2015.12.31
9
HPS Power Supply Operating Conditions
Symbol
Description
Condition (15)
Minimum (13)
Typical
Maximum
Unit
VCCH_GXB[L,R]
Transceiver high voltage power
supply
—
1.710
1.8
1.890
V
Related Information
•
•
•
Transceiver Performance for Arria 10 GT Devices on page 26
Provides the data rate ranges for different transceiver speed grades.
Transceiver Performance for Arria 10 GX/SX Devices on page 23
Provides the data rate ranges for different transceiver speed grades.
Arria 10 GX, GT, and SX Device Family Pin Connection Guidelines
HPS Power Supply Operating Conditions
Table 6: HPS Power Supply Operating Conditions for Arria 10 SX Devices—Preliminary
This table lists the steady-state voltage and current values expected from Arria 10 system-on-a-chip (SoC) devices with ARM®-based hard processor system
(HPS). Power supply ramps must all be strictly monotonic, without plateaus. Refer to Recommended Operating Conditions for Arria 10 Devices table for
the steady-state voltage values expected from the FPGA portion of the Arria 10 SoC devices.
Symbol
Description
Condition
Minimum (17)
Typical
Maximum (17)
Unit
HPS processor speed =
1.2 GHz
0.87
0.9
0.93
V
HPS core voltage and periphery
circuitry power supply
VCCL_HPS
HPS processor speed =
1.5 GHz, –1 speed grade
0.92
0.95
0.98
V
3.0 V
2.5 V
1.8 V
2.85
2.375
1.71
3.0
2.5
1.8
3.15
2.625
1.89
V
V
V
VCCIO_HPS
HPS I/O buffers power supply
(15)
These data rate ranges vary depending on the transceiver speed grade. Refer to Transceiver Performance for Arria 10 GT Devices table for exact data
rate ranges.
28.3 Gbps is the maximum data rate for GT channels. 17.4 Gbps is the maximum data rate for GX channels.
This value describes the budget for the DC (static) power supply tolerance and does not include the dynamic tolerance requirements. Refer to the
PDN tool for the additional budget for the dynamic tolerance requirements.
(16)
(17)
Arria 10 Device Datasheet
Send Feedback
Altera Corporation
INTEL [ INTEL ]
