欢迎访问ic37.com |
会员登录 免费注册
发布采购

TLD7002-16ES 参数 Datasheet PDF下载

TLD7002-16ES图片预览
型号: TLD7002-16ES
PDF下载: 下载PDF文件 查看货源
内容描述: [The TLD7002-16ES is a 16 channel device with integrated and protected output stages. It is designed to control LEDs with a current up to 76.5 mA as linear current sink (LCS). The power stages can be configured in parallel for higher load currents. Each individual power output stage is configured to a 6-bit current set value stored in the OTP. 16 independent and individual PWM configurations can be set. A high-speed lighting interface is used for device OTP programming, configuration, control and]
分类和应用:
文件页数/大小: 82 页 / 3105 K
品牌: INFINEON [ Infineon ]
 浏览型号TLD7002-16ES的Datasheet PDF文件第3页浏览型号TLD7002-16ES的Datasheet PDF文件第4页浏览型号TLD7002-16ES的Datasheet PDF文件第5页浏览型号TLD7002-16ES的Datasheet PDF文件第6页浏览型号TLD7002-16ES的Datasheet PDF文件第8页浏览型号TLD7002-16ES的Datasheet PDF文件第9页浏览型号TLD7002-16ES的Datasheet PDF文件第10页浏览型号TLD7002-16ES的Datasheet PDF文件第11页  
TLD7002-16ES  
Datasheet  
2 Pin configuration  
2
Pin configuration  
2.1  
Pin configuration  
Figure 3  
Pin configuration  
2.2  
Pin description  
Table 1  
Pin description  
Pin  
Symbol  
Function  
21  
VS  
Power supply voltage  
Supply for internal biasing and can be used for differential forward voltage  
measurement of the LED load  
1
VDD  
Digital GPIN supply voltage output  
Can be used as voltage reference for NTC/PTC thermistors and acts as HSLI bus  
voltage reference, thus as supply for the transceiver  
22  
-
GND  
EP  
Ground  
Ground potential. Connect externally close to the chip  
Exposed pad  
Connect to external heat spreading Cu area, either electrical GND or floating  
potential. Recommendation is to use the GND layer of a PCB with thermal vias,  
The exposed pad is not replacing the electrical GND pin  
5...20  
20  
OUT0...OUT15  
ERRN  
Output channel  
Open drain linear current sink. Connect to the target load  
ERROR flag I/O  
Open drain active low error flag. Connect to a pull-up resistor  
(table continues...)  
Datasheet  
7
Rev.1.00  
2022-05-03  
 复制成功!