™
PROFET + 24V
BTT6200-4ESA
Product summary
Product summary
The BTT6200-4ESA is a 200 mΩ quad channel Smart High-Side Power Switch, embedded in a PG-TSDSO-24
package, providing protective functions and diagnosis.
The power transistor is built by an N-channel vertical power MOSFET with charge pump. The device is
integrated in Smart6 HV technology. It is specially designed to drive lamps up to R10 W 24 V or R5 W 12 V, as well
as LEDs in the harsh automotive environment.
Table 1
Product summary
Parameter
Symbol
VS(OP)
Value
5 V to 36 V
65 V
Operating voltage range
Maximum supply voltage
VS(LD)
Maximum ON state resistance at TJ = 150°C per channel
Nominal load current (one channel active)
Nominal load current (all channels active)
Typical current sense ratio
RDS(ON)
IL(NOM)1
IL(NOM)2
kILIS
400 mΩ
1.5 A
1 A
300
Minimum current limitation
IL5(SC)
9 A
Maximum standby current with load at TJ = 25°C
IS(OFF)
500 nA
Diagnostic functions
•
•
•
•
•
•
Proportional load current sense multiplexed for the 4 channels
Open load detection in ON and OFF
Short circuit to battery and ground indication
Overtemperature switch off detection
Stable diagnostic signal during short circuit
Enhanced kILIS dependency with temperature and load current
Protection functions
•
•
•
•
•
•
Stable behavior during undervoltage
Reverse polarity protection with external components
Secure load turn-off during logic ground disconnection with external components
Overtemperature protection with latch
Overvoltage protection with external components
Enhanced short circuit operation
Product validation
Qualified for Automotive Applications.
Product validation according to AEC-Q100/101.
Datasheet
2
Rev. 1.00
2019-03-09
INFINEON [ Infineon ]
