欢迎访问ic37.com |
会员登录 免费注册
发布采购

BTS5210G 参数 Datasheet PDF下载

BTS5210G图片预览
型号: BTS5210G
PDF下载: 下载PDF文件 查看货源
内容描述: 智能高侧电源开关两个渠道: 2× 140mз状态反馈 [Smart High-Side Power Switch Two Channels: 2 x 140mз Status Feedback]
分类和应用: 外围驱动器驱动程序和接口开关接口集成电路电源开关光电二极管
文件页数/大小: 14 页 / 309 K
品牌: INFINEON [ Infineon ]
 浏览型号BTS5210G的Datasheet PDF文件第6页浏览型号BTS5210G的Datasheet PDF文件第7页浏览型号BTS5210G的Datasheet PDF文件第8页浏览型号BTS5210G的Datasheet PDF文件第9页浏览型号BTS5210G的Datasheet PDF文件第10页浏览型号BTS5210G的Datasheet PDF文件第11页浏览型号BTS5210G的Datasheet PDF文件第12页浏览型号BTS5210G的Datasheet PDF文件第13页  
BTS 5210G  
Package and Ordering Code  
Published by  
Standard: P-DSO-14  
Infineon Technologies AG,  
St.-Martin-Strasse 53,  
D-81669 München  
Sales Code  
BTS 5210G  
Ordering Code  
Q67060-S7502  
© Infineon Technologies AG 2001  
All Rights Reserved.  
Attention please!  
The information herein is given to describe certain  
components and shall not be considered as a guarantee of  
characteristics.  
Terms of delivery and rights to technical change reserved.  
We hereby disclaim any and all warranties, including but not  
limited to warranties of non-infringement, regarding circuits,  
descriptions and charts stated herein.  
Infineon Technologies is an approved CECC manufacturer.  
Information  
For further information on technology, delivery terms and  
conditions and prices please contact your nearest Infineon  
Technologies Office in Germany or our Infineon  
All dimensions in millimetres  
Technologies Representatives worldwide (see address list).  
Definition of soldering point with temperature T :  
upper side of solder edge of device pin 15.  
s
Warnings  
Due to technical requirements components may contain  
dangerous substances. For information on the types in  
question please contact your nearest Infineon Technologies  
Office.  
Pin 15  
Infineon Technologies Components may only be used in life-  
support devices or systems with the express written approval  
of Infineon Technologies, if a failure of such components can  
reasonably be expected to cause the failure of that life-  
support device or system, or to affect the safety or  
effectiveness of that device or system. Life support devices  
or systems are intended to be implanted in the human body,  
or to support and/or maintain and sustain and/or protect  
human life. If they fail, it is reasonable to assume that the  
health of the user or other persons may be endangered.  
Printed circuit board (FR4, 1.5mm thick, one layer  
70µm, 6cm2 active heatsink area) as a reference for  
max. power dissipation P , nominal load current  
tot  
I
and thermal resistance R  
L(NOM)  
thja  
25m  
12m  
12m  
6 8m  
Infineon Technologies AG  
14  
2003-Oct-01  
 复制成功!