HITFET - BTS3080TF
Smart Low-Side Power Switch
General Product Characteristics
Table 2
Absolute Maximum Ratings 1) (cont’d)
Tj = -40°C to +150°C; all voltages with respect to ground, positive current flowing into pin (unless otherwise
specified)
Parameter
Symbol
Values
Unit Note or Test Condition Number
Min. Typ. Max.
Temperatures
Operating temperature
Storage temperature
ESD Susceptibility
ESD susceptibility (all pins)
TJ
-40
-55
–
–
+150 °C
+150 °C
–
–
P_4.1.37
P_4.1.38
TSTG
VESD
VESD
-4
–
–
4
kV
kV
HBM4)
HBM4)
P_4.1.39
P_4.1.40
ESD susceptibility OUT-pin to
GND
-10
10
ESD susceptibility
VESD
-2
–
2
KV
CDM5)
P_4.1.41
1) Not subject to production test, specified by design.
2) VBAT(LD) is setup without the DUT connected to the generator per ISO 7637-1;
RI is the internal resistance of the load dump test pulse generator;
tD is the pulse duration time for load dump pulse (pulse 5) according ISO 7637-1, -2.
3) Maximum allowed value. Consider also inverse input current in inverse condition P_8.3.7 in Chapter 8
4) ESD susceptibility, HBM according to ANSI/ESDA/JEDEC JS001 (1.5 kΩ, 100 pF)
5) ESD susceptibility, Charged Device Model “CDM” ESDA STM5.3.1 or ANSI/ESD S.5.3.1
Notes
1. Stresses above the ones listed here may cause permanent damage to the device. Exposure to absolute
maximum rating conditions for extended periods may affect device reliability.
2. Integrated protection functions are designed to prevent IC destruction under fault conditions described in the
data sheet. Fault conditions are considered as “outside” normal operating range. Protection functions are
not designed for continuous repetitive operation.
4.2
Functional Range
Table 3
Functional Range 1)
Please refer to “Electrical Characteristics” on Page 18 for test conditions
Parameter
Symbol
Values
Unit Note or Test Condition Number
Min. Typ. Max.
Battery Voltage Range for Nominal VBAT(NOR) 6.0
Operation
–
18.0
V
V
–
P_4.2.1
P_4.2.2
Extended Battery Voltage Range VBAT(EXT)
0
–
31
parameter deviations
possible
for Operation
Input Voltage Range for Nominal VIN(NOR)
Operation
3.0
-40
–
–
5.5
V
–
–
P_4.2.3
P_4.2.5
Junction Temperature
TJ
150
°C
Datasheet
7
Rev. 1.0
2016-06-01
INFINEON [ Infineon ]
