Datasheet
DD2.X
Preliminary
PowerPC 750CL Microprocessor
Revision Log
Revision Date
Contents of Modification
Version 2.5
•
Changed part designator A0 recommended VDD range to 1.24 V (see Section 1.3, Part
Number Information, on page 12).
•
•
Added nominal VDD column (see Section 1.3, Part Number Information, on page 12).
Added information about reliability grade (see Section 1.3, Part Number Information, on
page 12).
•
Added a note about VDD values (see Section 1.3, Part Number Information, on
page 12).
•
•
•
Added Section 1.4, Reliability Information, on page 12.
Added Section 1.4.1, Package Reliability, on page 13.
Added text about voltage sense pins (see Section 3, Electrical and Thermal Character-
istics, on page 21).
December 2, 2008
•
•
Added a note about VDD values (see Table 3-1, Absolute Maximum Ratings, on
page 21).
Added power consumption information for IBMPPC750CLE73xx,
IBMPPC750CLE80xx, IBMPPC750CLE90xx, and IBMPPC750CLEA0xx (see Table
3-5, Power Consumption, on page 24).
•
•
Added a note about VDD values (see Table 3-5, Power Consumption, on page 24).
Removed notes about typical power and power dissipation (see Table 3-5, Power Con-
sumption, on page 24).
•
•
Changed SYSCLK slew rate, single-ended values (see Table 3-6, Clock AC Timing
Specifications, on page 25).
Added Section 3.5.2, Following HRESET Deassertion, on page 30.
Version 2.4
•
•
Changed the reliability grade (see Section 1.3, Part Number Information, on page 12).
May 29, 2007
Changed the power consumption values for the 1000 MHz part (see Table 3-5, Power
Consumption, on page 24).
Version 2.3
•
•
•
•
Updated the list of PowerPC 750CL features (see Section 1.1 on page 9).
Changed the Processor Version Register number (see Table 1-1 on page 11).
Changed the part number information (see Section 1.3 on page 12).
Updated the PowerPC 750CL Microprocessor Block Diagram (see Table 2-1 on
page 19).
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
Changed the description of the core power supply (see Table 2-2 on page 20).
Added a note about ESD ratings (see Table 3-1 on page 21).
Updated the recommended operating conditions (see Table 3-2 on page 22).
Updated the DC electrical specifications (see Table 3-4 on page 23).
Updated the power consumption table (see Table 3-5 on page 24).
Updated the clock AC timing specifications (see Table 3-6 on page 25).
Changed some values for AC timing reference levels (see Table 3-7 on page 27).
Updated the 60x Bus Output AC Timing Specifications (see Table 3-8 on page 31).
Updated the JTAG AC Timing Specifications (see Table 3-9 on page 34).
Corrected the number of balls in the 750CL package (see Section 4 on page 37).
Corrected a footnote (see Table 4-1 on page 41).
March 5, 2007
Removed two footnotes (see Table 5-1 on page 44).
Changed the description of the DBWO signal (see Table 5-4 on page 51).
Corrected the list of 750CL heat-sink vendors (see Table 5-5 on page 57).
Corrected the list of 750CL thermal interface and adhesive materials vendors (see
Table 5-6 on page 61).
•
Updated the Summary of Mode Select table (see Table 5-7 on page 63).
October 5, 2006
Version 2.2—Preliminary updated version of the datasheet
Version 2.1—Preliminary updated version of the datasheet
September 30, 2006
Version 2.5
December 2, 2008
Revision Log
Page 69 of 70