欢迎访问ic37.com |
会员登录 免费注册
发布采购

IBM39STB03201PBB09C 参数 Datasheet PDF下载

IBM39STB03201PBB09C图片预览
型号: IBM39STB03201PBB09C
PDF下载: 下载PDF文件 查看货源
内容描述: [Consumer Circuit, CMOS, PBGA304, PLASTIC, BGA-304]
分类和应用: 商用集成电路
文件页数/大小: 55 页 / 642 K
品牌: IBM [ IBM ]
 浏览型号IBM39STB03201PBB09C的Datasheet PDF文件第31页浏览型号IBM39STB03201PBB09C的Datasheet PDF文件第32页浏览型号IBM39STB03201PBB09C的Datasheet PDF文件第33页浏览型号IBM39STB03201PBB09C的Datasheet PDF文件第34页浏览型号IBM39STB03201PBB09C的Datasheet PDF文件第36页浏览型号IBM39STB03201PBB09C的Datasheet PDF文件第37页浏览型号IBM39STB03201PBB09C的Datasheet PDF文件第38页浏览型号IBM39STB03201PBB09C的Datasheet PDF文件第39页  
IBM39STB032xx  
IBM39STB034xx  
Preliminary  
STB032xx and STB034xx Digital Set-Top Box Integrated Controllers  
.
Absolute Maximum Ratings  
Parameter  
Maximum Rating  
3.0 V  
Supply voltage with respect to GND, 2.5 V supply  
Supply voltage with respect to GND, 3.3 V supply  
Case temperature under bias  
3.9 V  
TBD  
Storage temperature  
-65° C to 150° C  
Operating Conditions  
The STB03xxx Digital Set-Top Box Integrated Controller can interface to either 3.3 V or 5 V technologies. 5 V  
interfaces are supported only for drivers/receivers supporting 5 V tolerance (see Drivers/Receivers). The  
range for supply voltages is specified for five-percent margins relative to a nominal 2.5 V and 3.3 V power  
supply.  
Note: Device operation beyond the conditions specified in the table below is not recommended. Extended  
operation beyond the recommended conditions may affect device reliability.  
Recommended Operating Conditions  
Symbol  
Parameter  
Min  
Max  
2.62  
Unit  
V
V
Supply Voltage, 2.5 V  
Supply Voltage, 3.3 V  
2.38  
CC  
V
3.14  
3.47  
V
C
CC330  
T
Operating Free Air Temperature  
0°  
70°  
A
Power Considerations  
Power dissipation is determined by operating frequency, temperature, and supply voltage, as well as external  
source/sink current requirements.  
Power Sequencing  
The 2.5 V power supply must maintain the following relationship whenever the 3.3 V power supply voltage is  
greater than 0.4 V:  
2.5 V power supply voltage >= 0.4 V  
Supply excursions outside this range must be limited to less than 25 ms duration during each power-up or  
power-down event.  
General Recommendation  
System designs that derive the 2.5 V supply from a regulator running from the 3.3 V supply are recommended  
to ensure a fixed relationship between the two voltage supplies. Such usage substantially reduces the poten-  
tial for the 3.3 V supply to be present without the 2.5 V supply.  
Recommended Connections  
Power and ground pins should all be connected to separate power and ground planes in the circuit board to  
which the STB03xxx is mounted. Unused input pins must be tied inactive, either high or low.  
STB03_sds_041800.fm.01  
April 18, 2000  
Electrical Information  
Page 35 of 55  
 复制成功!