IBM0612404GT3B
IBM0612804GT3B
128Mb Double Data Rate Synchronous DRAM
Advance Rev 0.2
Write to Read: Minimum DQSS, Odd Number of Data (3 bit Write), Interrupting (CAS
Latency = 2; Burst Length = 8)
T1
T2
T3
T4
T5
T6
CK
CK
Write
NOP
NOP
NOP
Read
NOP
Command
t
WTR
BAa, COL n
BAa, COL b
Address
CL = 2
t
(min)
DQSS
DQS
DQ
DI a-b
1
2
2
DM
DI a-b = data in for bank a, column b.
An interrupted burst is shown, 3 data elements are written.
2 subsequent elements of data in are applied in the programmed order following DI a-b.
is referenced from the first positive CK edge after the last desired data in pair (not the last desired data in element)
t
WTR
The Read command masks the last 2 data elements in the burst.
A10 is Low with the Write command (Auto Precharge is disabled).
The Read and Write commands are not necessarily to the same bank.
1 = This bit is correctly written into the memory array if DM is low.
2 = These bits are incorrectly written into the memory array if DM is low.
Don’t Care
©IBM Corporation. All rights reserved.
Use is further subject to the provisions at the end of this document.
06K0566.F39350
5/00
Page 38 of 79
IBM [ IBM ]
