HI-SINCERITY
MICROELECTRONICS CORP.
Spec. No. : IC200912
Issued Date : 2009.07.15
Revised Date :
Page No. : 1/13
H6850 Series
Novel Low Cost Green-Power PWM Controller
With Low EMI Technique
Feature
Low Cost, PWM&PFM&CRM (Cycle
Reset Mode)
Low Start-up Current (about 3μA)
Low Operating Current (about 1.2mA)
Current Mode Operation
Under Voltage Lockout (UVLO)
Built-in Synchronized Slope
Compensation
Built-in Low EMI Technique
Programmable PWM Frequency
Audio Noise Free Operation
Leading edge Blanking on Sense input
Constant output power limiting for
universal AC input Range
SOT-23-6L
、SOP8
and DIP-8 Pb-Free
Packaging
Good Protection Coverage With Auto
Self-Recovery
Compatible with
SG6848 (6849) /
SG5701/SG5848/LD7535 (7550) /
OB2262 (2263)/OB2278（2279）
Complete Protection with
Soft Clamped GATE output voltage
18.0V
VDD over voltage protect 34.0V
Cycle-by-cycle current limiting
Output SCP (Short circuit Protection)
Output OLP (Over Load Protection)
High-Voltage CMOS Process with ESD
Standby Power Supplies
Set-Top Box Power Supplies
384X Replacement
Applications
Switching AC/DC Adaptor
Battery Charger
Open Frame Switching Power Supply
General Description
The H6850 is a highly integrated low cost
current mode PWM controller, which is ideal
for small power current mode of offline
AC-DC fly-back converter applications.
Making use of external resistors, the IC
changes the operating frequency and
automatically enters the PFM/CRM (Cycle
Reset Mode) under light-load/zero-load
conditions. This can minimize standby
power consumption and achieve power-
saving functions. With a very low start-up
current, the H6850 could use a large value
start-up resistor (2MΩ).
Built-in synchronized slope compensation
enhances the stability of the system and
avoids sub-harmonic oscillation. Dynamic
peak current limiting circuit minimizes output
power change caused by delay time of the
system over a universal AC input range.
H6850P, H6850S,H6850NF
Leading edge blanking circuit on current
sense input could remove the signal glitch
due to snubber circuit diode reverse
recovery and thus greatly reduces the
external component count and system cost
in the design. Cycle-by-Cycle current
limiting ensures safe operation even during
short-circuit.
Excellent EMI performance is achieved
built-in soft driver and low EMI technique.
The H6850 offers perfect protection like
OVP(Over Voltage Protection)、OLP(Over
Load Protection)
、
SCP(Short circuit
protection)、OTP、Sense Fault Protection
and OCP(Over current protection). The
H6850’s output driver is soft clamped to
maximum 18.0V to protect the power
MOSFET. H6850 is offered in SOT-23-6L,
SOT-8 and DIP-8 packages.
HSMC Product Specification
HSMC [ HI-SINCERITY MOCROELECTRONICS ]
