■Product Specifications
Number of contacts
AWG10
AWG12
25A
AWG14
20A
AWG16
15A
Operating temperature range
Operating humidity range
-35ç to 85ç (Note 1)
1
2
3
4
5
30A
25A
25A
22A
22A
20% to 80%
20A
18A
15A
Current
rating
Storage temperature range
Storage humidity range
-10ç to 60ç (Note 2)
40% to 70% (Note 2)
20A
18A
15A
Ratings
18A
15A
13A
18A
15A
13A
UL/C-UL/TÜV File No. and Recognition No.
Specification
UL/C-UL
TÜV
AC/DC 1000V
UL
: E52653
: E52653
: R9950703
Voltage
rating
AC/DC
AC/DC
600V
600V
C-UL
TÜV
Item
Specification
Condition
1. Contact resistance
2. Insulator resistance
3. Withstanding voltage
4. Insertion-Extraction force (per contact)
5. Durability (mating/unmating)
6. Vibration
Contact resistance(Initial value): 5 m ohms max.
1000 M ohms min.
20mV max., 1mA
1000 V DC
No flashover or Insulator breakdown
0.3N min., 5N max.
2500 V AC for 1 minute
Measured with a steel pin of 1.6 x 0.8 0.002 thickness
30 cycles
Contact resistance of 10 m ohms max.
No electrical discontinuity of 1 µs. min.
No electrical discontinuity of 1 µs. min.
Contact resistance 10 m ohms max.
Contact resistance of 10 m ohms max.
Frequency 10 to 55 Hz, single amplitude of 0.75 mm, 3 axis, duration of 2 hours
2
7. Shock
Acceleration of 490 m/s , 11 ms duration, sine half-wave waveform, 3 cycles in each of the 3 axis.
8. Humidity
Temperature 40ç 2ç, 90% to 95% RH, 96 hours
9. Temperature cycle
(-55ç: 30 minutes■ 5 to 35ç: 5 minutes■85ç: 30 minutes■5 to 35ç: 5 minutes) for 5 cycles
Re-flow solder temperature 250ç, for 10 seconds
Manual soldering: Soldering iron temperature 300ç, 3 seconds
10. Resistance to Soldering heat
No deformation of the insulator parts affecting performance
Note 1: Current rating of header is 30A (1 pos.) and 25A (2 to 5 pos.)
Note 2: Includes temperature rise caused by the current flow.
Note 3: The term "storage" refers to products stored for long period of time prior to mounting and use. Operating Temperature Range and Humidity
range covers non- conducting condition of installed connectors in storage, shipment or during transportation.
■Materials
Product
Part
Material
Finish
Color: Natural white
Tin-lead plated
Remarks
UL94V-0
----------
Sockets
Insulator
Contacts
Insulator
Contacts
Polyamide
(Note 1)
(Note 2)
(Note 1)
(Note 2)
Crimp contacts
High conductivity copper alloy
Polyamide (Glass reinforced)
High conductivity copper alloy
Color: Natural beige
Tin-lead plated
UL94V-0
----------
Headers
Note 1: Standard Color, colors of the differing coupling forms are black for DF22R and red for DF22L.
Note 2: Hirose Electric's plating incorporate anti-whisking compounds.
■Ordering Information
■Socket, Header
■Contacts
DF22 B L - 2 S - 7.92 C
DF22 A - 1416 SCF
1
2
3
4
5
6
7
1
8
9
10
1 Series name: DF22
2 Form Type
Sockets
4
5
Number of contacts : 1 to 5
Connector type
8 Applicable Cable
Blank : UL1430
: UL1015
Applicable Conductor
1416 : AWG 14 to AWG 16
1012 : AWG 10 to AWG 12
10 Packaging
SCF : Socket contacts / Reel
S
: Socket
A
DS
P
: Double-row socket
: Header
9
Blank : Standard height, standard lock (Type I)
B : Long type, standard lock (Type III)
C : Long type, ergonomic lock (Type IV)
EP
DEP
RS/P
: In-line plug
:
Double-row in-line plug
In-line Plugs
: Retainer
: 7.92 mm
Blank : With panel stop
A : Without panel stop
6 Contact pitch
SC : Socket contacts / Bag
3 Guide key type
7 Type of housing
PCF : In-line plug contacts / Reel
PC : In-line plug contacts / Bag
Blank : Inside (Color: natural)
R : Right side (Color: black)
L : Left side (Color: red)
C
: Crimp housing
DSA
DS
: Straight header
: Right-angle header
No letter : Retainer
2
HRS [ HRS ]
