Hazardous Location
3/4 INCH EXPLOSION-PROOF SENSORS (All dimensions for reference only. mm/[in])
When properly installed using the explosion containment method, all 3070X and catalog listings on this page are certified for use in
hazardous locations as follows: Class I, Groups A, B, C, D; Class II Groups E, F, G; Class III.
These catalog listings have been tested to and meet the requirements of applicable U.S. and Canadian specifications for the
locations described above.
General Specifications
Test Condition Specifications
Parameter Characteristic
Surface speed 25 m/s
[1000 in/s]
8 DP
Parameter
Characteristic
Parameter
Characteristic
Min. output voltage 60 Vp-p
Inductance
115 mH max.
Coil resistance
191 Ohm to 280 Ohm
Gear pitch range
12 DP (module 2.11)
or coarser
Gear
(module 3.17)
0,127 mm
[0.005 in]
Pole piece
diameter
Min. surface
speed
4,75 mm [0.187 in]
Optimum actuator 8 DP (module 3.17)
ferrous metal gear
Air gap
0,38 m/s [15 in/s] typ.
Max. operating
frequency
40 kHz typ.
Load
100 kOhm
resistance
Operating temp.
range
-73 ºC to 93 ºC
[-100 ºF to 200 ºF]
Vibration
Mil-Std 202F
Method 204D
Mounting thread
3/4-20 UNEF-2A
Termination
18 AWG PVC-Insulated
Leads
Catalog
Listing
3070A
Thread
Length (A)
45 mm [1.8 in] 294 g [10.5 oz]
Weight
24,05
[1.00]
31,75
[1.250]
3000 MIN
[120.00]
A
1/2-14 NPT
3070A35 88 mm [3.5 in] 322 g [11.5 oz]
BLIND END SHELL
POLE PIECE
2
www.honeywell.com/sensing
HONEYWELL [ Honeywell ]
