HMC788ALP2E
v00.0913
pHEMT GAIN BLOCK
MMIC AMPLIFIER, DC - 10 GHz
Pin Descriptions
Pin Number
Function
Description
Interface Schematic
The pins are not connected internally; however, all data
shown herein was measured with these pins connected to
RF/DC ground externally.
1, 4, 6
N/C
This pin is DC coupled.
An off chip DC blocking capacitor is required.
2
5
RFIN
RFOUT
RF output and DC Bias for the output stage.
This pin and exposed ground paddle must
be connected to RF/DC ground.
3
GND
Application Circuit
For price, delivery and to place orders: Hittite Microwave Corporation, 2 Elizabeth Drive, Chelmsford, MA 01824
Phone: 978-250-3343 Fax: 978-250-3373 Order On-line at www.hittite.com
Application Support: Phone: 978-250-3343 or apps@hittite.com
5
HITTITE [ HITTITE MICROWAVE CORPORATION ]
