HMC788ALP2E
v00.0913
pHEMT GAIN BLOCK
MMIC AMPLIFIER, DC - 10 GHz
Absolute Maximum Ratings
Typical Supply Current
Collector Bias Voltage (Vcc)
RF Input Power (RFIN)(Vs = +5V)
Junction Temperature
+7V
Vcc (V)
Icq (mA)
+15 dBm
150 °C
4.5
65
76
87
5.0
Continuous Pdiss (T = 85 °C)
(derate 8.5 mW/°C above 85 °C)
5.5
0.55 W
Thermal Resistance
(junction to ground paddle)
118 °C/W
Storage Temperature
Operating Temperature
ESD Sensitivity (HBM)
-65 to +150 °C
-40 to +85 °C
Class 1A
ELECTROSTATIC SENSITIVE DEVICE
OBSERVE HANDLING PRECAUTIONS
Outline Drawing
NOTES:
1. LEADFRAME MATERIAL: COPPER ALLOY
2. DIMENSIONS ARE IN INCHES [MILLIMETERS]
3. LEAD SPACING TOLERANCE IS NON-CUMULATIVE
4. PAD BURR LENGTH SHALL BE 0.15mm MAXIMUM.
PAD BURR HEIGHT SHALL BE 0.05mm MAXIMUM.
5. PACKAGE WARP SHALL NOT EXCEED 0.05mm.
6. ALL GROUND LEADS AND GROUND PADDLE MUST BE
SOLDERED TO PCB RF GROUND.
7. REFER TO HITTITE APPLICATION NOTE FOR SUGGESTED
LAND PATTERN.
Package Information
Part Number
Package Body Material
Lead Finish
MSL Rating
MSL1 [2]
Package Marking [1]
788A
XXXX
HMC788ALP2E
RoHS-compliant Low Stress Injection Molded Plastic
100% matte Sn
[1] 4-Digit lot number XXXX
[2] Max peak reflow temperature of 260 °C
For price, delivery and to place orders: Hittite Microwave Corporation, 2 Elizabeth Drive, Chelmsford, MA 01824
Phone: 978-250-3343 Fax: 978-250-3373 Order On-line at www.hittite.com
Application Support: Phone: 978-250-3343 or apps@hittite.com
4
HITTITE [ HITTITE MICROWAVE CORPORATION ]
