HMC1060LP3E
v00.1211
QUAD LOW NOISE HIGH PSRR
LINEAR VOLTAGE REGULATOR
Pin Descriptions
Pin number
1
2
Function
Vdd
gnd
description
Unregulated power supply input
Supply ground
interface Schematic
3
en
enable input, ttL Logic Level. the Vrx outputs are
floating (high impedance) when en = Low.
4
reF
reference voltage (band-gap) output. Cannot be used to
source/sink current to/from external circuits. Voltage on
reF pin = 1.17 at +27°C when PtAt Mode is disabled,
and equals 1.37 V at +27°C when PtAt Mode is enabled.
Must be measured with 10 gΩ meter such as Agilent
33410A, typical 10 MΩ dVM may read erroneously.
5
13
HV3
HV2
Used with rd3 to set Vr3 output voltage.
Used with rd2 to set Vr2 output voltage.
16
HV1
Used with rd1 to set Vr1 output voltage.
8
PtAtB
Sets all output voltages in PtAt mode when connected to
gnd, default mode when open
6
7
14
15
rd3
rd4
rd2
rd1
Feedback for Vr3.
Feedback for Vr4
Feedback for Vr2
Feedback for Vr1
For price, delivery and to place orders: Hittite Microwave Corporation, 2 Elizabeth Drive, Chelmsford, MA 01824
Phone: 978-250-3343
Fax: 978-250-3373
Order On-line at www.hittite.com
Application Support: Phone: 978-250-3343 or apps@hittite.com
Power Conditioning - SMt
6