HMC1040LP3CE
v00.0112
GaAs pHEMT MMIC LOW NOISE
AMPLIFIER, 24 - 43.5 GHz
Evaluation PCB
List of Material for Evaluation PCB EVAL01-HMC1040LP3CE
item
J1-J4
Tp5-Tp8
C1 - C3
C4 - C6
C7 - C9
U1
pCB
[2]
Description
2.92 mm Connectors
Test points DC pin
100 pF Capacitor, 0402 Pkg.
10 nF Capacitor, 0402 Pkg.
4.7 µF Capacitor, Tantalum
HmC1040lp3Ce Amplifier
600-00271-00-2 evaluation pCB
[1]
[1] Reference this number when ordering complete evaluation PCB
[2] Circuit Board material: rogers 4350 or Arlon 25fr
The circuit board used in this application should
use RF circuit design techniques. Signal lines
should have 50 ohm impedance while the pack-
age ground leads and exposed paddle should be
connected directly to the ground plane similar to
that shown. A sufficient number of via holes should
be used to connect the top and bottom ground
planes. The evaluation board should be mounted
to an appropriate heat sink. The evaluation circuit
board shown is available from Hittite upon request.
For price, delivery and to place orders: Hittite Microwave Corporation, 2 Elizabeth Drive, Chelmsford, MA 01824
Phone: 978-250-3343
Fax: 978-250-3373
Order On-line at www.hittite.com
Application Support: Phone: 978-250-3343 or apps@hittite.com
Amplifiers - low Noise - smT
6
HITTITE [ HITTITE MICROWAVE CORPORATION ]
