HMC616LP3 / 616LP3E
v00.0508
GaAs SMT PHEMT LOW NOISE
AMPLIFIER, 175 - 660 MHz
5
Evaluation PCB
List of Material for Evaluation PCB 120728 [1]
The circuit board used in this application should use
RF circuit design techniques. Signal lines should
have 50 ohm impedance while the package ground
leads and exposed paddle should be connected
directly to the ground plane similar to that shown.
A sufficient number of via holes should be used to
connect the top and bottom ground planes. The
evaluation board should be mounted to an appro-
priate heat sink. The evaluation circuit board shown
is available from Hittite upon request.
Item
Description
PCB Mount SMA RF Connector
DC Pin
J1, J2
J3, J4
C1
10nF Capacitor, 0402 Pkg.
1000 pF Capacitor, 0603 Pkg.
0.47μF Capacitor, 0603 Pkg.
100 pF Capacitor, 0402 Pkg.
18 nH Inductor, 0603 Pkg.
51 nH Inductor, 0402 Pkg.
3.92 kΩ Resistor, 0402 Pkg.
HMC616LP3(E) Amplifier
120616 Evaluation PCB
C2
C3
C4
L1
L2
R1 (Rbias)
U1
[2]
PCB
[1] Reference this number when ordering complete evaluation PCB
[2] Circuit Board Material: Rogers 4350.
For price, delivery, and to place orders, please contact Hittite Microwave Corporation:
20 Alpha Road, Chelmsford, MA 01824 Phone: 978-250-3343 Fax: 978-250-3373
Order On-line at www.hittite.com
5 - 245