HMC407MS8G
/
407MS8GE
v03.1006
GaAs InGaP HBT MMIC
POWER AMPLIFIER, 5 - 7 GHz
Evaluation PCB
11
LINEAR & POWER AMPLIFIERS - SMT
11 - 33
List of Materials for Evaluation PCB 104987
[1]
Item
J1 - J2
J3
C1 - C3
C4
U1
PCB
[2]
Description
PCB Mount SMA RF Connector
2 mm DC Header
330 pF Capacitor, 0603 Pkg.
2.2 μF Capacitor, Tantalum
HMC407MS8G / HMC407MS8GE Amplifier
104628 Eval Board
[1] Reference this number when ordering complete evaluation PCB
[2] Circuit Board Material: Roger 4350
The circuit board used in the final application should
use RF circuit design techniques. Signal lines should
have 50 ohm impedance while the package ground
leads and exposed paddle should be connected
directly to the ground plane similar to that shown. A
sufficient number of via holes should be used to con-
nect the top and bottom ground planes. The evalua-
tion board should be mounted to an appropriate heat
sink. The evaluation circuit board shown is available
from Hittite upon request.
For price, delivery, and to place orders, please contact Hittite Microwave Corporation:
20 Alpha Road, Chelmsford, MA 01824 Phone: 978-250-3343 Fax: 978-250-3373
Order On-line at www.hittite.com
HITTITE [ HITTITE MICROWAVE CORPORATION ]
