Part Names and Features
M6 Mounting Hole
C-Mount Port
Workplate
M6-thread mounting hole. You
can use a mounting post or an
angle mount for illumination.
There are two C-mount ports at
the top and bottom of the stage
block. You can connect the
stage block to other optical
blocks through blocks such
as the A11213 C-mount in-
terchangeable filter block.
The stage block comes with three different
workplates:
A workplate with a 36 mm diam-
eter hole. With this workplate,
you can put the sample on a
slide and observe its reflected-
light or transmitted-light image
or measure its fluorescence.
This workplate is specially de-
signed for use with the
A10657-01 microwell slide
(sold separately).
A workplate that you can
place an object on to observe
its reflected-light image in an
upright configuration or to ex-
cite it from above and meas-
ure its fluorescence.
* Please purchase illuminators from a
company that manufactures them.
Micrometer
The micrometer enables you
to perform precise horizontal
(X-axis) and vertical (Z-axis)
alignment and to accurately
reproduce prior positionings.
NOTE: Objective lens is not included.
Spacer
Objective Lens Mount A10921
A 20 mm spacer is installed
This is a mount for an objective lens. You can mount and remove
the objective lens mount using the left and right screws. You can
place the objective lens mount at the top of the stage mount for
upright configurations, and at the bottom for inverted configura-
tions. The A10858 comes with one objective lens mount.
between the workplate and
the XZ axis stage. Remov-
ing this spacer will give you
20 mm of extra space,
which is useful when ob-
serving relatively tall objects
in an upright configuration.
You can move the work-
plate along the X and Y ax-
es by attaching an X-axis
stage (SURUGA SEIKI
B11-40C) in place of the
spacer.*
45 mm
Parfocal distance
45 mm
Micrometer height
adjustment of
3 mm
NOTE: An additional A10921 objective lens mount (sold
separately) is attached in the above example.
Stage clips are not included.
* Please direct inquiries about
the X-axis stage to SURUGA
SEIKI.
Accesories
Objective Lens Mount A10921
Microwell Slide A10657-01
* There is a separate catalog for microwell slides.
Please refer to that catalog for more information.
13