GS9060 Data Sheet
Table 2-1: DC Electrical Characteristics (Continued)
TA = 0°C to 70°C, unless otherwise specified.
Parameter
Symbol
Conditions
Min
Typ
Max
Units Test
Levels
Notes
Digital I/O
Input Logic LOW
Input Logic HIGH
Output Logic LOW
Output Logic HIGH
VIL
–
–
–
–
0.8
–
V
V
V
V
1
–
–
–
–
VIH
VOL
VOH
–
2.1
1
1
1
8mA
8mA
–
0.2
–
0.4
–
IO_VDD
- 0.4
Input
Input Bias Voltage
RSET Voltage
VB
–
–
1.45
0.6
–
V
V
6
1
2
3
VRSET
RSET=281Ω
0.54
0.66
Output
Output Common Mode
Voltage
VCMOUT
75Ω load, RSET=281Ω
0.8
1.0
1.2
V
1
–
TEST LEVELS
NOTES
1. Production test at room temperature and nominal supply voltage with
guardbands for supply and temperature ranges.
2. Production test at room temperature and nominal supply voltage with
guardbands for supply and temperature ranges using correlated test.
3. Production test at room temperature and nominal supply voltage.
4. QA sample test.
1. All DC and AC electrical parameters within specification.
2. Input common mode is set by internal biasing resistors.
3. Set by the value of the RSET resistor.
4. Loop-through enabled.
5. Calculated result based on Level 1, 2, or 3.
6. Not tested. Guaranteed by design simulations.
7. Not tested. Based on characterization of nominal parts.
8. Not tested. Based on existing design/characterization data of similar
product.
9. Indirect test.
22208 - 8 January 2007
15 of 61
GENNUM [ GENNUM CORPORATION ]
