欢迎访问ic37.com |
会员登录 免费注册
发布采购

GS1561-CFE3 参数 Datasheet PDF下载

GS1561-CFE3图片预览
型号: GS1561-CFE3
PDF下载: 下载PDF文件 查看货源
内容描述: GS1560A / GS1561 HD - LINX -R II双率解串器 [GS1560A/GS1561 HD-LINX-R II Dual-Rate Deserializer]
分类和应用: 存储静态存储器
文件页数/大小: 80 页 / 1307 K
品牌: GENNUM [ GENNUM CORPORATION ]
 浏览型号GS1561-CFE3的Datasheet PDF文件第54页浏览型号GS1561-CFE3的Datasheet PDF文件第55页浏览型号GS1561-CFE3的Datasheet PDF文件第56页浏览型号GS1561-CFE3的Datasheet PDF文件第57页浏览型号GS1561-CFE3的Datasheet PDF文件第59页浏览型号GS1561-CFE3的Datasheet PDF文件第60页浏览型号GS1561-CFE3的Datasheet PDF文件第61页浏览型号GS1561-CFE3的Datasheet PDF文件第62页  
GS1560A/GS1561 Data Sheet  
Table 3-12: Host Interface Description for Error Mask Register  
Register Name  
Bit  
Name  
Description  
R/W  
Default  
ERROR_MASK  
Address: 01Ah  
15-11  
Not Used.  
0
0
0
0
0
0
0
0
0
0
0
10  
9
8
7
6
5
4
3
2
1
0
VD_STD_ERR_MASK  
FF_CRC_ERR_MASK  
AP_CRC_ERR_MASK  
LOCK_ERR_MASK  
CCS_ERR_MASK  
YCS_ERR_MASK  
CCRC_ERR_MASK  
YCRC_ERR_MASK  
LNUM_ERR_MASK  
SAV_ERR_MASK  
EAV_ERR_MASK  
Video Standard Error Flag Mask bit.  
Full Field CRC Error Flag Mask bit.  
Active Picture CRC Error Flag Mask bit.  
Lock Error Flag Mask bit.  
R/W  
R/W  
R/W  
R/W  
R/W  
R/W  
R/W  
R/W  
R/W  
R/W  
R/W  
Chroma Checksum Error Flag Mask bit.  
Luma Checksum Error Flag Mask bit.  
Chroma CRC Error Flag Mask bit.  
Luma CRC Error Flag Mask bit.  
Line Number Error Flag Mask bit.  
Start of Active Video Error Flag Mask bit.  
End of Active Video Error Flag Mask bit.  
3.10.5.1 Video Standard Error Detection  
If a mismatch between the received SMPTE 352M packets and the calculated  
video standard occurs, the GS1560A/GS1561 will indicate a video standard error  
by setting the VD_STD_ERR bit of the ERROR_STATUS register HIGH.  
3.10.5.2 EDH CRC Error Detection  
The GS1560A/GS1561 calculates Full Field (FF) and Active Picture (AP) CRC  
words according to SMPTE RP165 in support of Error Detection and Handling  
packets in SD signals.  
These calculated CRC values are compared with the received CRC values. If a  
mismatch is detected, the error is flagged in the AP_CRC_ERR and/or  
FF_CRC_ERR bits of the ERROR_STATUS register. These two flags are shared  
between fields 1 and 2.  
The AP_CRC_ERR bit will be set HIGH when an active picture CRC mismatch has  
been detected in field 1 or 2. The FF_CRC_ERR bit will be set HIGH when a full  
field CRC mismatch has been detected in field 1 or 2.  
EDH CRC errors will only be indicated when the device is operating in SD mode  
(SD/HD = HIGH), and when the device has correctly received EDH packets.  
SMPTE RP165 specifies the calculation ranges and scope of EDH data for  
standard 525 and 625 component digital interfaces. The GS1560A/GS1561 will  
utilize these standard ranges by default.  
27360 - 8 September 2005  
58 of 80  
 复制成功!